GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC697MDL252
SKU 2171246 UPC 0872164904988
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
MSRP $1515
Product Description
The IC697MDL252 Discrete Input Module is manufactured by GE for the Series 90-70. Highlights include four isolated groups of eight points for a total of 32 points, a 20 ms input filter, and proximity switch compatibility. This 12 VAC module works with an array of input devices, including pushbuttons, limit switches, selector switches, and electronic proximity switches (2 or 3 wire type). Due to the IC697MDL252 module’s isolated points, each group can be used on a separate phase of the AC supply. Input is resistive with current-voltage characteristics and meet IEC standard (type 1).
The IC697MDL252 uses LED indicators to identify the ON-OFF status of each point on the logic/PLC side of the circuit. These are located at the top of the module. The IC697MDL252 module is keyed mechanically to ensure appropriate replacement with a similar type in the field. The user can configure I/O references free of jumpers or DIP switches. Configuration is completed via MS-DOS or Windows programming software (running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port). This software configuration function is preinstalled on the device.
The IC697MDL252 module’s input circuitry provides enough current to guarantee reliable operation of the switching device. Input current is typically 10mA in the ON state and accepts a maximum of 2 mA leakage current in the OFF state without turning on. Three-wire proximity switches are used since they provide low voltage drop in the ON state and low leakage current in the OFF state. Two-wire proximity switches pull power from the signal connections. This means both the ON state voltage and the OFF state leakage current are higher than for 3-wire devices. This module is designed to be compatible with most of two–wire devices, but each device type should be carefully checked for compatibility in both the ON and OFF states.
Technical Specifications
| Rated Voltage: | 12 volt AC |
| Number of Inputs: | 32 Inputs (4 Isolated groups of 8) |
| Input Current: | 10 mA |
| Current Required: | 0.30 Amps |
| Freq: | 47 to 63 Hz |
| DC Power: | No |
Technical Information
Specifications
|
Rated Voltage: Inputsper Module: |
12 VAC, 47 to 63 Hz Sinusoidal 32 (four groups of eight inputs each) |
|
Isolation: |
1500 volts RMS - any input to backplane 500 volts RMS between input groups |
|
InputCurrent: |
10mA (typical) at rated voltage |
|
InputImpedance: |
1.12Kohms typical |
|
InputCharacteristics- |
|
|
On-stateVoltage: |
7.5 to 15 volts RMS, 47 to 63 Hz Sinusoidal |
|
Off-state Voltage: |
0 to 2.5 volts RMS, 47 to 63 Hz Sinusoidal |
|
On-stateCurrent: |
6mAto15mA |
|
Off-stateCurrent: |
0 to 2.5mA (2mA minimum at 2.5V input) |
|
Filter Delay Time: |
20mstypical |
|
Current Required from 5VDCbackplanebus: |
0.3 amps |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL252
Troubleshooting information is available on IC697MDL252's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL252
PDF Supply can repair your IC697MDL252 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL252? Answer: The IC697MDL252 is a 12 Volt AC, 32-Point Input module of the GE Fanuc Series 90-70. This module provides 4 isolated groups of 8 points each.
- Question: The 4 isolated groups of 8 input points allow what to happen? Answer: Because they are isolated, it allows for each group of 8 points to be used on a different phase of the AC supply.
- Question: What are the features of IC697MDL252? Answer:
- 32 points- 4 isolated groups of 8 points
- 20 ms input filter
- proximity switch compatible
- Question: With what are the input characteristics compatible? Answer: They are compatible with a wide range of available proximity switches.
- Question: What do the LED indicators (located at the top of the module) tell you? Answer: They inform you of the status of each point on the logic (PLC) side of the circuit.
- Question: Is configuration of I/O references available on IC697MDL252? Answer: Yes, they are configurable without the use of jumpers or DIP switches.
- Question: Configuration of IC697MDL252 is done through what? Answer: Configuration can be completed through the configuration function of the MS-DOS or Windows programming software.
- Question: What should I do in the event my IC697MDL252 is not working properly? Answer: Your IC697MDL252 may be in need of repair.
For more information on the IC697MDL252 12 Volt AC, 32-Point Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: Datasheet, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
