PDF Electric and Supply

1-800-360-6802
1-919-535-3180
sales@pdfsupply.com

IC697MDL340

Buy NowIC697MDL340
IC697MDL340
IC697MDL340 Wiring

Rated 4.6/5 based on 13 ratings.
  • IC697MDL340
  • IC697MDL340 Wiring

Product Description



IC697MDL340 is a 120 VAC 16-Point Output Module by GE for the Series 90-70.
Highlighted features include four isolated groups for a total of 16 points, 2 amp capacity per point, and 10x rated current high inrush capacity. This discrete output module allows the groups of points to be used on separate phases of the AC supply. The four-output groups are fused individually with a 10 amp fuse.

The IC697MDL340 module delivers a high degree of inrush current, which makes the outputs ideal for a number of inductive and incandescent loads. This particular module will pick up most size 4 contactors. Another highlight of the IC697MDL340 module is the use of LED indicators to show the ON/OFF status of each point on the PLC side of the circuit. Additionally, there is an LED to emit the status of the fuses, which are grouped at the top of the module. The module is keyed mechanically, which guarantees correct replacement with a similar type in the field. I/O references are user-configurable, and DIP switches and jumpers are unnecessary.

The IC697MDL340 is compatible with an array of load devices, including solenoids, motor starters, and indicators. The rating of 2 amps per point relates to the long term capacity of each point. Due to heat dissipation within the module, the max current capacity for each group of outputs is limited to 4 amps. Each output on the module is capable of transiently conducting a surge current greater than its long-term current rating. The rate at which such surges can be repeated depends on the current rating of the device and the duty cycle (percent of time the device is ON). In certain operating conditions, the module can be programmer-configured. Output points can be programmed to maintain existing output state or turn OFF by default. 

Technical Specifications


Rated Voltage: 120 volt AC
Number of Outputs:  16 Outputs (4 Isolated groups of 4)
Output Current: 2 Amps per point, 4 Amps per group
Current Required: 0.25 Amps
Freq: 47 to 63 Hz
DC Power: No

 

GE Fanuc GE Fanuc Series 90-70

SKU 2173456  UPC 0295786274268

Part Number: IC697MDL340 / ic697mdl340
Mfr/Brand Name: GE Automation
Mfr Number: IC697MDL340 / ic697mdl340
Type:120 volt AC, 2 Amp Discrete Output Module, 16 Output Points

Troubleshooting and Product Information for IC697MDL340

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC697MDL340
Price: $495
10 In Stock
1 Year PDF Supply Warranty

*Need a Specific Revision?

Reman IC697MDL340
Price: $283
43
In Stock

2 Year PDF Supply Warranty

*What is Remanufactured?

Save
 43%
Repair Your IC697MDL340
Price: $206
1 Year PDF Supply Warranty
Call For Assistance
1-800-360-6802

Other IC697MDL340

Available Revisions:

Confirm Your Revision Number

1C697MDL340 , GEFIC697MDL340 , CIMIC697MDL340

Specifications

Rated Voltage:

Outputs per Module:

120 volts AC

16 (four groups of four outputs each)

Isolation:

1500 volts – any output to backplane

500 volts between groups

Output Voltage Range:

85 to 132 volts, 47 to 63 Hz

Output Current:

2 amps maximum per point

 

4 amps maximum per group

Output Characteristics –

 

Inrush Current:

20 amps maximum for one cycle (20 ms)

Output Voltage Drop:

3 volts maximum

Response Time–On:

1 ms maximum

Response Time–Off:

1/2 cycle

Output Leakage:

1.5 mA maximum

Current Required from 5V Bus:

0.25 amp

VME

System designed to support the VME standard C.1

Troubleshooting IC697MDL340

Troubleshooting information is available on IC697MDL340's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC697MDL340

PDF Supply can repair your IC697MDL340 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers


  • Question:  What is an IC697MDL340?  Answer:  The IC697MDL340 is an 120 Volt AC, 2 Amp, 16-Point Output module of the GE Fanuc Series 90-70. This module provides 4 isolated groups of 4 points each. 
  • Question: The 4 isolated groups of 4 output points allow what to happen?  Answer:  Because they are isolated, it allows for each group of 4 points to be used on a different phase of the AC supply. (Each group of 4 outputs is individually fused with a 10 amp fuse.)
  • Question: What are the features of IC697MDL340?  Answer:
    • 16 points- 4 isolated groups of 4 points
    • 2 amp capacity per point
    • high inrush capacity (10x rated current)
  • Question: Because IC697MDL340 has a high degree of inrush current, the outputs are suitable for what? Answer:  They are suitable for a large range of inductive and incandescent loads. (The module will pick up most size 4 contactors.)
  • Question: What do the LED indicators (located at the top of the module) tell you?  Answer:  They inform you of the status of each point on the logic (PLC) side of the circuit. There is also a LED to tell you the status of the fuses. 
  • Question: Is configuration of I/O references available on IC697MDL340?  Answer:  Yes, they are configurable without the use of jumpers or DIP switches. 
  • Question: Configuration of IC697MDL340 is done through what?  Answer:  Configuration can be completed through the configuration function of the MS-DOS or Windows programming software. 
  • Question: What should I do in the event my IC697MDL340 is not working properly?  Answer:  Your IC697MDL340 might be in need of repair

For more information on the IC697MDL340 120 Volt AC, 2 Amp, 16-Point Output Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 

 

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.


Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.


Free Overnight delivery on orders over $500!


What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.


Free Overnight delivery on orders over $500!


What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.


Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!


What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.


Free Overnight delivery on orders over $500!


Download Lastest Documentation


Please visit this manufacturer's website to download the lastest manuals and datasheets.


Lowest Price Guarantee


We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping



FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.