GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST



Rated 4.6/5 Based on 12 ratings.

Rate your purchase of the IC697MDL653

SKU 2176453  UPC 0489238680459

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Technical Specifications for IC697MDL653

ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697MDL653
Product TypeInput Module
Rated Voltage24 Volts DC
Inputs per Module32
Isolation Voltage1500 Volts (any input to backplane), 500 Volts (between input groups)
Input Voltage Range-3 to +30 Volts DC
Input Current10 milliamps
Input Impedance2.6 kiloohms

Product Description

The IC697MDL653 is a Positive / Negative Logic Input Module with 32 points. This 24 VDC module is manufactured by GE for the 90-70 Series.
Its 32 input points are arranged in four isolated sets comprised of eight points.

Additional features of the IC697MDL653 include Positive/Negative Logic and proximity switch compatibility, a selectable input filter, and a single input configured as an interrupt. These features are common in all IC697 PLCs. The features may, however, not be applicable when IC697MDL653 is coupled with other types of PLCs. The IC697MDL653 module also comes equipped with LED indicators on its faceplate to alert the user to the module’s status. These LEDs indicate the on/off status of each point on the PLC side of the circuit.

Conveniently, the module’s input/output references can easily be configured by the user without the use of jumpers or DIP switches. The IC697MDL653 is designed to have both positive and negative logic characteristics; thus it is able to source current from the input device to the common user. The applicable input device is connected to the power bus and the module input. The following input devices are all compatible with the IC697MDL653: pushbuttons, limit switches, selector switches, and electronic proximity switches including 2-wire and 3-wire types.


Ideally, inputs on this module are driven by any IC697 PLC voltage compatible output module. The input circuit provides enough current to ensure that the device functions reliably. The input current is typically 10mA in the ON state and can accept 2 mA leakage current in the OFF state without turning on.

Technical Specifications

Rated Voltage: 24 volts DC
Number of Inputs: 32 Inputs (4 groups of 8 each)
Input Current: 10 mA at rated voltage
Current Required: 0.3 Amps
Input Voltage Range:   -3 to +30 volts DC
DC Power: Yes


The GE Fanuc Series 90-70 discrete input module with the catalog number IC697MDL653 has a rated voltage of 24 Volts DC an input voltage range of -3 to 30 Volts DC. The IC697MDL653 discrete input module is also a positive/negative logic input module with 32 total input points. All of these input points are grouped in 4 groups of 8 inputs each. The IC697MDL653 input module has an isolation voltage rating of 1500 Volts for any input that is connected to the backplane and 500 Volts between the input groups. The IC697MDL653 positive/negative logic input module has a typical input current of 10 milliamps at the rated voltage and a typical input impedance of 2.6 kiloohms.

The IC697MDL653 positive/negative input module has an on-state voltage of 13.5 to 30 Volts and an off-state voltage of 0 to 5 Volts. The on-state current is 6 to 15 milliamps and the off-state current is 0 to 2 milliamps. In addition to that, the IC697MDL653 input module has a configurable filter delay time of 1 to 10 milliseconds. The configuration of filer delay time is made on a point-by-point basis and it should be noted that all points feature the same filter time. The unit requires 0.3 Amps of current from the 5 Volts bus. The module comes with a mechanical keying capability which makes it impossible to install it on the wrong base. Also, the IC697MDL653 module accepts wire gauges from AWG #22 to AWG #14 and it can be easily removed from its slot in the rack if necessary.

Technical Information


Rated Voltage:

Inputs per Module:

24 volts DC

32 (four groups of eight inputs each)


1500 volts - any input to backplane

500 volts between input groups

Input Voltage Range (Vs): Input Current:

Input Impedance:

-3 to +30 volts DC

10mA (typical) at rated voltage 2.6K ohm, typical



On-state Voltage:

13.5 volts to 30 volts

On-state Current:

6mA to 15mA

Off-state Voltage:

0 volts to 5 volts

Off-state Current:

0 to 2mA (2mA minimum at 5V input)

Filter Delay Time:

1mS or 10mS configurable

Current Required from 5V Bus:

0.30 amp


System designed to support the VME standard C.1


Troubleshooting IC697MDL653

Troubleshooting information is available on IC697MDL653's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC697MDL653

PDF Supply can repair your IC697MDL653 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC697MDL653?  Answer:
    • The IC697MDL653 is a 24 Volt DC, Positive/Negative Logic, 32-Point Input module from the GE Fanuc Series 90-70. 
  • Question:  What features does it include?  Answer:
    • 32 points- 4 isolated groups of 8 points each
    • Positive/Negative Logic Compatibility
    • Proximity switch compatible
    • Input filter selectable* - 1 mS or 10 mS
    • One input configurable as interrupt*
      • *These features are available for all IC697 PLCs. They may, however, not be available when this module is used with other types of PLCs.
  • Question:  The LED indicators (located at the top of the module) do what?  Answer:  They let you know the on/off status of each point on the logic (PLC) side of the circuit. 
  • Question:  What is special about the I/O references?  Answer:  They are configurable without the use of jumpers or DIP switches on the module. 
  • Question:  Configuration of IC697MDL653 is done through what?  Answer:  Configuration of IC697MDL653 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port. 
  • Question:  What should I do in the event my IC697MDL653 is not working properly?  Answer:  Your IC697MDL653 may be in need of repair

For more information on the IC697MDL653 24 Volt DC, Positive/Negative Logic, 32-Point Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 


PDFsupply Tech

The IC697MDL653 is similar to the IC697MDL350 in that they both have four isolated groups of 8 points each. This module is keyed in order to be able to replace it with a similar type in the field.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetEmersonManualPDFPLCPriceRepairSpecificationTroubleshootUser-ManualWiring


PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.