GE / IP FANUC Series 90/30 In Stock
The IC697MDL654 is a 48 VDC Positive/Negative Logic 32-Point Input Module by GE Fanuc for series 90-70 PLCs. The inputs of this module divide into four groups, each having a separate power supply. It can be used to connect to a variety of different switches and electronic proximity sensors with either two or three wire connectors. With some CPUs, it can also apply different input filter time schedules and may cause CPU interruption. To determine compatibility of input devices, such as two-wire sensors, ON and OFF states must be checked.
The IC697MDL654 connects to a backplane connector and secures itself in place with a jackscrew. To remove or install, power must be OFF, and then the user is free to disconnect. Untightening the safety screw and pressing the clips on the back of the cover allow the terminal board to disengage. To wire the terminals, wires #22 to #14 can be used. Once everything is connected, the wire bundle can be secured with a tie at the bottom of the terminal board. A hinged door provides both coverage of the inside of the board as well as space for an identification label.
Every IC697MDL654 module includes a mechanical key. This key hooks onto the board below the connector. When it is attached to a slot, no other type of module can be connected on that slot. To assure proper ventilation, install the module in a way that provides at least six inches of empty space around it.
|Rated Voltage:||48 volts DC|
|Number of Inputs:||32 Inputs (4 groups of 8 each)|
|Input Current:||4.7 mA at rated voltage|
|Current Required:||0.3 Amps|
|Input Voltage Range:||-3 to +56 volts DC|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.