1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC697MDL671
SKU 0 UPC 00
MSRP $3101
Common misspellings:
- 1C697MDL671
- lC697MDL671
- IC697MD1671
- IC697MDL67l
- IC697MDL671
Product Description
The IC697MDL671 is a 14-Point Interrupt Input module, 24 Volt DC, manufactured by GE Fanuc for the 90-70 Series. The IC697MDL671 provides a total of 16 points organized into four isolated groups of four points each. The first 14 points (A1 through D2) are referred to as interrupt inputs, and the last two points (D3- D4) are configuration inputs. All 14 interrupt points can run at the maximum I/O interrupt rate.
Other notable features include positive/negative logic compatibility, a compatible proximity switch, and a selectable input filter (-1 mS or 10 mS). The IC697MDL671 showcases both positive and negative logic characteristics and is therefore capable of sourcing current from input devices to the common users. This module is compatible with a wide range of input devices such as limit switches, electronic proximity switches, selector switches, and pushbuttons.
Inputs on the IC697MDL671 module may be directly driven by a compatible voltage output module. The input circuit offers enough current to ensure dependable operation of the switching device. In the ON state, input current is typically 10mA and can accept up to 2mA leakage current in the OFF state without turning on. ON-OFF status of each point is indicated by LED lighting located at the top of the module.
Older versions of this module came with a mechanical key that prevented accidental replacement of a module with the wrong type. A new module without this keying feature can be installed in a previously-keyed slot without removing the earlier key. The key may, however, be easily removed by simply pushing it upward while pulling it off the rail.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| Number of Inputs: | 16 Inputs (4 groups of 4 each) |
| Input Current: | 10 mA at rated voltage |
| Current Required: | 0.3 Amps |
| Input Voltage Range: | -3 to +30 volts DC |
| DC Power: | Yes |
Technical Information
Specifications
|
Rated Voltage: Inputsper Module: |
24 volts DC 14 interrupts (total of 16 inputs with four groups of four inputs each) |
|
Isolation: |
1500 volts - any input to backplane 500 volts between input groups |
|
Input Voltage Range (Vs): InputCurrent: InputImpedance: |
–3 to +30 volts DC 10mA (typical) at rated voltage 2.6K ohm, typical |
|
InputCharacteristics On-stateVoltage:
On-stateCurrent: Off-state Voltage:
Off-stateCurrent: Filter Delay Time: Minimum Pulse Width
Minimum Interrupt Burst (1 ms Filter Selection) r Single Point: withIC697CPM915CPU at 1 second PLC WatchdogSetting withIC697CPU731CPU at 2.5 seconds PLC WatchdogSetting Minimum Through-Put * Interrupt Input to Discrete Output Response withIC697CPM915CPUandIC697MDL740 Output Module with DOIOFunction * Amount of user logic in the interrupt block may affect performance. |
Positive: 13.5 volts to 30 volts |
|
Negative: –3 volts to Vs –13.5 volts |
|
|
6mA to 15mA |
|
|
Positive: –3 volts to 5 volts |
|
|
Negative: Vs –5 volts to 30 volts |
|
|
0 to 2mA (2mA minimum at 5V input) |
|
|
1 ms or 10 ms configurable |
|
|
1 ms Filter Select: 1 ms on and off |
|
|
10 ms Filter Select: 11 ms on and off |
|
|
500 Hz |
|
|
290 Hz |
|
|
1.5 ms |
|
|
Current Required from 5V Bus: |
0.30 amp |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL671
Troubleshooting information is available on IC697MDL671's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL671
PDF Supply can repair your IC697MDL671 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL671? Answer: The IC697MDL671 is a 24 Volt DC, Positive/Negative Logic, 14-Point Interrupt Input module from the GE Fanuc 90-70 Series.
- Question: How many points total does IC697MDL671 have? Answer: IC697MDL671 has 16 points total. It has 4 isolated groups of 4 points each.
- Question: How many interrupt points does IC697MDL671 have? Answer: IC697MDL671 has 14 interrupt points with 2 configuration points.
- Question: At what rate can the interrupt points run? Answer: All 14 interrupt points can run at the maximum I/O interrupt rate.
- Question: How are the points labeled? Answer: The first 14 points are labeled A1 through D2 (These are the interrupt inputs.). The last 2 points are labeled D3 and D4 (These are the configuration inputs.).
- Question: What are some of the other features that IC697MDL671 provides? Answer:
- Positive/Negative Logic Compatibility
- Proximity switch compatible
- Input filter selectable- 1 mS or 10 mS
- Question: Configuration of IC697MDL671 is done through what? Answer: Configuration of IC697MDL671 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port.
- Question: What should I do in the event my IC697MDL671 is not working properly? Answer: Your IC697MDL671 may need repair.
For more information on the IC697MDL671 24 Volt DC, Positive/Negative Logic, 14-Point Interrupt Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
