GE / IP FANUC Series 90/30 In Stock
SKU 2174238 UPC 0587449550186
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697PCM711 is a Single-Slot Programmable Coprocessor (PCU) designed by GE for the Fanuc 90-70 series. The IC697PCM711 is equipped with a dual tasking module that can be programmed to perform various functions such as real-time computations, operator interface, and data functions that include storage, acquisition and communication. Communication from the module and the PLC CPU are by way of the backplane, and no application program support is needed. Several PCMs can be supported in a single IC697 PLC system, which can accommodate an optional expansion memory capacity of 512 Kbytes. Operation of the IC697PCM711 module can be done with or without an expansion memory daughter board. Base memory contains a maximum capacity of 95 Kbytes of user memory. The expansion memory daughter board allows expansion of program/data memory by 64,128, 256, or 512 Kbytes.
The power requirement for the IC697PCM711 module is 1.0amp, which is derived from the 5V bus. The lithium battery is conveniently located on the baseboard housing and supports memory; it has a shelf life of 10 years at 20 degrees Celsius or 64-degree Fahrenheit. Memory can be retained for six months without applied power. It is important to install a new battery before removing the old battery.
The IC697PCM711 module can be configured and programmed with various computer types such as the IC647 or IC640 or IBM-compatible PC, XT, or AT with PCM Development Software. The software is used to construct parameters for the serial port. The two serial ports are compatible and act at the same time. Jumpers and dip switches are not needed, but the board must be configured using the PCM software before operation can begin.
Module Type: | Programmable Coprocessor |
Number of Slots: | 1 (Single slot) |
Current Required: | 1.0 Amp |
Programmed by: | IC647, IC640 or IBM-compatible PC |
Serial Ports: | 2 (RS232/RS-422/RS-485 compatible) |
Battery Shelf Life: | 10 years at 20 deg.C (68 deg F) |
Common related search terms: Battery, Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.