GE / IP FANUC Series 90/30 In Stock
SKU 2176420 UPC 0448180479436
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697PWR720 is a Single-slot Power Supply Adapter Module (PSA) for the IC697 I/O system. Highlighted features of this PSA include its ability to interface an external power supply to an IC697 rack and easy connection to power supply. Additionally, it plugs into a convenient power supply slot in the rack. As noted, this PSA is a single-slot module and plugs into the leftmost slot in an IC697 rack. The IC697PWR720 must be connected to an external power supply using a cable. The external power supply can be an IC697 power supply module or another external power supply.
The +5, +12, and -12 VDC outputs are generated by an external power supply and are connected to the rack backplane via the PSA module. This also applies to the 5V remote sense. The max currents that can be supplied to the backplane through the PSA are as follows: 18 amps on the +5 volt output, 2 amps on the +12 volt output, and 1 amp on the -12 volt output.
The PSA monitors the +5 volt output and the compatible Input Power OK signal (TTL) from the external power supply. The TTL indicates that the external power supply input voltage is satisfactory to sustain hold-up time for an orderly system shutdown. The PSA also develops two backplane signals, ACFAIL* and SYSRESET*, which are for the power up and down sequence. The external power supply must provide adequate hold-up time (5.05 milliseconds minimum, per ANSI/IEEE STD1014-1987) in addition to TTL to guarantee an orderly system shutdown when power is removed.
|Type of Module:||Power Supply Adapter|
|Number of Slots:||1 (single slot)|
|Power Supply Voltage:||+5 VDC, +12 VDC, -12 VDC|
|Power Supply Current:||18 Amps, 2 Amps, 1 Amp|
|Current Required:||50 mA from 5 V bus|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.