GE / IP FANUC Series 90/30 In Stock
SKU 2176051 UPC 0799705796157
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC697PWR722 is a 90 Watt, FM Certified, 24 VDC Power Supply Module for the GE Fanuc 90-70 series. It features operation from +21 VDC to +32 VDC and three regulated DC output voltages (90W total +5 VDC output at 16.5 amps; +12 VDC output at 1.5 amps; and -12 VDC output at 1.0 amp. This module mounts externally to the rack, comes equipped with electronic short circuit overcurrent protection on all outputs, and has input power fail and system reset signals. The IC697PWR722 can be attached to a rack’s left side, or it can simply be used as a stand-alone unit. The module provides +5 volt, + 12 volt and -12 volt regulated DC power outputs as well as a compatible logic shutdown signal (TTL). The power supply module must be connected to a PSA module number IC697PWR720, which plugs into a IC697CHS rack’s power supply slot.
The PSA module connects the power supply outputs to the IC697CHS rack backplane and observes the TTL signal to provide logic level sequencing signals to the backplane. A factory installed cable connects the power supply to the PSA. The IC697PWR722 PSA module can be used in a single rack application or to provide power to a second rack. If the user chooses to provide power to a second rack, the total load must be within the supply rating. A prewired cable IC697CBL700 allows interconnection to the second rack. Overcurrent and overvoltage fault conditions are conveniently protected. Electronic overcurrent protection covers all outputs.
|Nominal Rated Voltage:||24 volts DC|
|Input Voltage Range:||21 to 32 VDC|
|Input Power:||156 watts at full load|
|Output power||90 watts|
|Location on Baseplates:||Leftmost slot or as a stand-alone unit|
|DC Output:||+5VDC, +12 VDC, -12 VDC|
Repair your IC697PWR722
For more information on the IC697PWR722 24 VDC, 90W Power Supply Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.