1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.5/5 Based on 7 ratings.

Rate your purchase of the IC697PWR724

SKU 2178209  UPC 0948544425814


MSRP $3363

Repair Service


Save $2,893

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Product Description

The IC697PWR724 is a 90 Watt, 24 VDC Power Supply Module (PSA) in the GE Fanuc 90-70 Series.
Highlights include operation from 24 VDC and three output voltage options for a total of 90 watts (+5 VDC output up to 18 amps; +12 VDC output up to 1.5 amps; and -12 VDC output up to 1 amp). The module features easy slide-in rack mount construction, electronic short circuit overcurrent protection provided on a 5 volt bus, and two rack operation from a single power supply.

The PSA mounts on the rack and plugs straight into a 48-pin backplane-mounted connector in the rack’s leftmost slot. It provides +5 volt, +12 volt, and -12 volt power as well as logic level sequencing signals to the backplane. The IC697PWR724 power supply can be utilized in a single rack application. Additionally, this PSA can deliver power to a second rack assuming the total load is within the appropriate supply rating. Interconnection to the second rack is by way of a prewired cable (part IC697CBL700). Power supply output will ride through a 10 ms total loss of input power at full load. Both overcurrent and overvoltage fault conditions are protected.

This PSA module operates from a 24 VDC nominal line. The power supply can accept an input voltage range of 18 to 32 VDC. For operation at ambient temperatures that exceed 50 C (122 F), the maximum output power must be derated. Please refer to the installation manual for this and additional mounting and ground instructions.  

Technical Specifications

Nominal Rated Voltage: 24 volts DC
Input Voltage Range: 18 to 32 VDC
Input Power: 160 watts at full load
Output power 90 watts
Location on Baseplates:   Leftmost slot
DC Output: +5VDC, +12 VDC, -12 VDC


Technical Information


Nominal Rated Voltage: Input Voltage Range:

24 VDC

18 to 32 VDC

Input Power:

Input Inrush Energy:

160 watts maximum @ full load

22 joules maximum

Output Power: Output Voltage:

90 watts maximum (total for all 3 outputs)

+5 VDC:   4.90 to 5.25 volts (5.07 volts nominal)

+12 VDC: 11.75 to 12.6 volts

-12 VDC:  -12.6 to -11.75 volts

Protective Limits - Overvoltage Limit: Overcurrent Limit:


+5 VDC Output:  5.7 to 6.7 volts

+5 VDC output: 26 amps, maximum

+12 VDC output:   4 amps, maximum

-12 VDC output:   2 amps, maximum

Ride Through Time:

10 milliseconds minimum @20 VDC


System designed to support the VME standard C.1


Troubleshooting IC697PWR724

Troubleshooting information is available on IC697PWR724's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC697PWR724

PDF Supply can repair your IC697PWR724 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers

  • Question:  What is an IC697PWR724?  Answer:  The IC697PWR724 is a 24 VDC, 90W Power Supply module from the GE Fanuc 90-70 Series. 
  • Question:  Into where does this unit plug?  Answer:  This rack-mounted unit plugs directly into a 48-pin backplane-mounted connector in the leftmost slot in the rack. 
  • Question:  What power does it provide?  Answer:  It provides +5 volt, +12 volt, and -12 volt power (as well as logic level sequencing signals to the backplane).
  • Question:  Can this unit only provide power to a single rack application?  Answer:  No. This unit can, yes, provide power to a single rack application, but it can also be used to provide power to a second rack (as long as the total load is within the supply rating).
  • Question:  Interconnection to the second rack is through what?  Answer:  It is through a pre-wired cable (like IC697CBL700).
  • Question:  What are some of the features that IC697PWR724 provides?  Answer:
    • Operation from 24 VDC
    • 3 output voltages (90W total): +5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp
    • Slide-in rack mount construction
    • Electronic short circuit overcurrent protection provided on a 5 volt bus
    • 2 rack operation from a single power supply
  • Question:  What should be my next step if my IC697PWR724 is not working properly?  Answer:  Your IC697PWR724 may be in need of repair

For more information on the IC697PWR724 24 VDC, 90W Power Supply Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 


ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetEmersonManualPDFPLCPriceRepairSpecificationTroubleshootUser-ManualWiring

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.