PDF Electric and Supply

1-800-360-6802
1-919-535-3180
sales@pdfsupply.com

IC697PWR748

Buy NowIC697PWR748
IC697PWR748
IC697PWR748 Wiring

Rated 4.6/5 based on 10 ratings.
  • IC697PWR748
  • IC697PWR748 Wiring

Product Description



The IC697PWR748 is a 90W 48 VDC Power Supply Module by GE Fanuc for the 90-70 Series.
It has three output voltages (+5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp) totaling 90 watts. The module features slide-in rack mount construction and two rack operation from a single power supply. This power supply is equipped with electronic short circuit overcurrent protection provided on a 5 volt bus.

This particular unit plugs into a 48-pin backplane-mounted connector (see leftmost slot in the rack). It delivers +5 volt, +12 volt, and -12 volt power. Logic level sequencing signals to the backplane. The IC697PWR748 power supply module can be used in a single rack application or, if the user prefers, it can provide power to a second rack. If the latter is chosen, it is important that the total load is within the supply rating.

Interconnection to the second rack is by way of a prewired cable (IC697CBL700). The power supply output will ride through a 10 ms total loss of input power at full load. Protection is delivered for overcurrent and overvoltage fault conditions. The power supply comes standard with an electronic overvoltage protection circuit which will clamp the output if the 5 V bus exceeds 6.7 volts. External overvoltage on the output will not cause the power supply fuse to open, but if an internal fault in the power supply caused the overvoltage condition, it is possible for the fuse to open. If the fuse needs replacement, a 5 amp, 250 volt 5x20 mm fuse should be used.

Technical Specifications


Nominal Rated Voltage: 48 volts DC
Input Voltage Range: 35 to 60 VDC
Input Power: 160 watts at full load
Output power: 90 watts
Location on Baseplates:    Leftmost slot
DC Output: +5VDC, +12 VDC, -12 VDC

 

GE Fanuc GE Fanuc Series 90-70

SKU 2174354  UPC 06329242291610

Part Number: IC697PWR748 / ic697pwr748
Mfr/Brand Name: GE Automation
Mfr Number: IC697PWR748 / ic697pwr748
Type: 48 volt DC, 90W Power Supply Module.

Troubleshooting and Product Information for IC697PWR748

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

Surplus New IC697PWR748
Price: $1,995
1 In Stock
3 Year PDF Supply Warranty

*What is Surplus New?

Save
 23%
Repair Your IC697PWR748
Price: $612
1 Year PDF Supply Warranty
Call For Assistance
1-800-360-6802

Other IC697PWR748

Available Revisions:

Confirm Your Revision Number

1C697PWR748 , GEFIC697PWR748 , CIMIC697PWR748

Specifications

 

Nominal Rated Voltage: Input Voltage Range:

48 VDC

35 to 60 VDC

Input Power:

Input Inrush Energy:

160 watts maximum @ full load

28  joules maximum at 60 VDC Input

Output Power: Output Voltage:

 

 

Minimum Load:

90 watts maximum (total for all 3 outputs)

+5 VDC:   4.90 to 5.25 volts (5.07 volts nominal)

+12 VDC: 11.75 to 12.6 volts

–12 VDC:  -12.6 to -11.75 volts

1.0 A on +5 VDC

Protective Limits -

 

Overvoltage Limit:

+5 VDC Output:  5.7 to 6.7 volts

Overcurrent Limit:

+5 VDC output: 26 amps, maximum

 

+12 VDC output:   4 amps, maximum

 

–12 VDC output:   2 amps, maximum

Ride Through Time:

10 milliseconds minimum

VME

System designed to support the VME standard C.1

Troubleshooting IC697PWR748

Troubleshooting information is available on IC697PWR748's website page; it also includes a datasheet user-manual and a wiring diagram.


Repair your IC697PWR748

PDF Supply can repair your IC697PWR748 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

Customer Questions and Answers


  • Question:  What is an IC697PWR748?  Answer:  The IC697PWR748 is a 48 VDC, 90W Power Supply module from the GE Fanuc 90-70 Series. 
  • Question:  Into where does this unit plug?  Answer:  This rack-mounted unit plugs directly into a 48-pin backplane-mounted connector in the leftmost slot in the rack. 
  • Question:  What power does it provide?  Answer:  It provides +5 volt, +12 volt, and -12 volt power (as well as logic level sequencing signals to the backplane).
  • Question:  Can this unit only provide power to a single rack application?  Answer:  No. This unit can, yes, provide power to a single rack application, but it can also be used to provide power to a second rack (as long as the total load is within the supply rating).
  • Question:  Interconnection to the second rack is through what?  Answer:  It is through a pre-wired cable (like IC697CBL700).
  • Question:  What are some of the features that IC697PWR748 provides?  Answer:
    • Operation from 48 VDC
    • 3 output voltages (90W total): +5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp
    • Slide-in rack mount construction
    • Electronic short circuit overcurrent protection provided on a 5 volt bus
    • 2 rack operation from a single power supply
  • Question:  What should be my next step if my IC697PWR748 is not working properly?  Answer:  Your IC697PWR748 may be in need of repair

For more information on the IC697PWR748 48 VDC, 90W Power Supply Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual. 

 

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.


Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.


Free Overnight delivery on orders over $500!


What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.


Free Overnight delivery on orders over $500!


What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.


Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!


What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.


Free Overnight delivery on orders over $500!


Download Lastest Documentation


Please visit this manufacturer's website to download the lastest manuals and datasheets.


Lowest Price Guarantee


We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping



FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.