GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200UAR028 IC200UAR028AIC200UAR028BIC200UAR028CIC200UAR028DIC200UAR028EIC200UAR028FIC200UAR028GIC200UAR028HIC200UAR028IIC200UAR028JIC200UAR028KIC200UAR028LIC200UAR028MIC200UAR028NIC200UAR028OIC200UAR028PIC200UAR028QIC200UAR028RIC200UAR028SIC200UAR028TIC200UAR028UIC200UAR028VIC200UAR028WIC200UAR028XIC200UAR028YIC200UAR028Z
Versamax Relay Out (2 at 10 amp and 10 at 2 a mp) 120V/240AC Power Supply. Battery (IC200ACC403) is required for dat a retention. Battery not included. Micro 28 point PLC,(16) 120VAC In, (12)
The IC200UAR028 VersaMax Micro PLC provides one DC output and accepts 16 DC inputs. It is a product of the GE Fanuc microseries 90-30. This device differs slightly from its counterpart modules on the output current ratings of its Q1 DC output and power supply. A nominal input power of +24 Volts DC is used to provide 450 milliamps of current. DC voltage requires more voltage at the startup (approximately 4 Volts DC more than the rated input voltage) with a minimum of 2 Amps of current to power the DC supply. Whenever the power-up diagnostics are disabled, the IC200UAR028 PLC starts a logic solution of 100 milliseconds after the voltage level of the input reaches and stays at the rated DC power level. It has 11 Form A relays that enable it to run loads like indicators.
The 16 input circuits on the IC200UAR028 VersaMax Micro PLC are reactive resistors and capacitors which cannot be driven by DC current and are rated at 120 Volts AC instead. Therefore, AC input power from an external source is required to operate the field devices for the PLC. This module lacks the PWM device that is used for the pulstrain operation and it does not have a high-speed counter either. Consequently, it weighs about 1.32 pounds or 600 grams with a frequency of 50 to 60 Hertz. It supports a maximum of 2 milliamps rms current and 30 Volts rms voltage for its “off” functionality, and it supports a minimum of 4.5 milliamps rms current and 80 Volts rms voltage for starting up. The IC200UAR028 PLC is also capable of handling a maximum resistive load of 2 Amps and 240 Volts AC at 24 Volts DC or 10 Amps and 240 Volts AC at 24 Volts DC.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.