GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200UDR001 IC200UDR001-CJIC200UDR001AIC200UDR001BIC200UDR001CIC200UDR001DIC200UDR001EIC200UDR001FIC200UDR001GIC200UDR001HIC200UDR001IIC200UDR001JIC200UDR001KIC200UDR001LIC200UDR001-LTIC200UDR001MIC200UDR001NIC200UDR001OIC200UDR001PIC200UDR001QIC200UDR001RIC200UDR001SIC200UDR001TIC200UDR001UIC200UDR001VIC200UDR001WIC200UDR001XIC200UDR001YIC200UDR001Z
|Product Type||PLC Module|
|Inputs||8 DC Inputs|
|Outputs||6 NO Relay Outputs|
|Output Voltage Ratings||5-250V AC, 5-30V DC|
|Nominal Input Power||100-240V AC|
|Input Resistance||2.8 kiloohms|
Versamax micro 120V 240 AC power supply 14 point PLC 24VDC in relay out. PLC IC200UDR001
The IC200UDR001 PLC module is a Versamax 14-point micro PLC module manufactured by GE Fanuc. It comes with 8 DC inputs and 6 normally open relay outputs. The outputs can control 5 to 30 Volts DC or 5 to 250 Volts AC rated output devices. The IC200UDR001 PLC module uses 100 Volts AC to 240 Volts AC of nominal input power to operate. The features of the module include 9K words of memory, 256 words of register memory, RAM with capacitor backup, and it supports up to 4 expansion units. The memory protection switch can be used to clear severe faults when these occur. This module supports a maximum of 8 slave devices per RS-485 network and 1.3 ms/K of typical scan rate for Boolean logic.
The IC200UDR001 PLC module can be configured to provide built-in high-speed counter and pulse operation. The counters can detect rapid pulse signals at up to 10-kilo hertz of frequency to serve a range of industrial applications such as flow meter and process control applications. It provides a 24 Volts DC supply to power the DC input circuit and for input devices. The relay outputs can be configured as counter outputs. However, the outputs of the IC200UDR001 PLC module cannot be configured as PWM outputs or pulse train outputs. It has an expansion connector on its top face. The inputs have 24 Volts DC of rated input voltage, 7.5 milliamps of typical input current, 2.8 kilo-ohms of input resistance, and 0.5 to 20 milliseconds of configurable response time. The GE Fanuc VersaPro software package offers easy and simple PLC programming.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.