1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC200UEC108

Rated 4.5/5 Based on 2 ratings.

Rate your purchase of the IC200UEC108

Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

New

$258

7 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Reman

$112

Save $146

7 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Service

$86

Save $172

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Expansion 8 Point Combination Outsink Outputs 4IN/4OUT 24VDC UEC108 Versamax Micro PLC

Technical Information

The IC200UEC108 expansion module is a VersaMax Micro PLC 8, 14, or 16-point expansion module from GE Fanuc. It comes with 4 DC inputs and 4 DC sink type transistor outputs. It is a modular expansion unit that can be used to expand the I/O points of a standard Micro PLC module. The IC200UEC108 expansion module comes with features such as removable terminal strips, expansion connectors, status LEDs, and cables. This module provides wiring flexibility for removable terminal assemblies. The specifications of the DC inputs are 24 Volts DC of rated input voltage, 7.5 milliamps of input current, and 1500 Volts RMS of field side to logic side isolation voltage.          

 

The IC200UEC108 expansion module has an expansion connector on the left side to connect it into the Micro PLC module or to another expansion unit. The next expansion unit can be connected to the connector at the right-hand side of the module. It provides a 0.1-meter ribbon cable for connections. This expansion unit can be located a maximum of 2 meters away from the programmable logic controller or PLC that it is being used to expand. It is easy and safe to remove the terminal assembly and the field wiring from the module after turning off the power to the PLC. A voltage rating of 24 Volts DC of nominal input power is required to operate the module. The power specifications of the transistor outputs include 12/24 Volts DC of voltage, 0.7 Amps of maximum current load per point, 0.3 Volts of output voltage drop, and 10 milliamps of minimum switching current. The IC200UEC108 expansion module has Status LEDs for a quick visual verification of the application processes.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.