1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com
GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
sales@pdfsupply.com
IC200UEX014
SKU 2178156 UPC 0829281179263
Common misspellings:
- 1C200UEX014
- lC200UEX014
- IC2o0UEX014
- IC20oUEX014
- IC200UEXo14
- IC200UEX0l4
- IC200UEX01A
- IC200UEX014
Versamax micro 24VDC power supply 14 point exp 24V DC out GE PLC UEX 014 IC200UEX014
Technical Information
The IC200UEX014 module is an expansion unit that has been designed by GE Fanuc Automation and included in the Versamax micro-series. This expansion module comes with 14 I/O points and it can be used with 8 DC inputs, 2 low-current outputs, and 4 high-current outputs. This unit requires a nominal input power of at least 24 Volts DC. Different DC input devices can be connected to this unit, and these units can have positive or negative logic characteristics and they are also compatible with a wide range of other equipment. The GE Fanuc Automation IC200UEX014 expansion unit must not exceed its current rating of 200 milliamps, including the external device current and the input current circuit.
The GE Fanuc Automation IC200UEX014 expansion unit provides isolation to the outputs between the field and logic sides. This unit has a power range of between 20 and 25 percent at 24 Volts DC and the hold-up time at 19.2 Volts DC is 10 milliseconds. The inrush current for this unit goes up to 0.16 Amps at a specific voltage of 24 Volts DC. The power supply provided by the GE Fanuc Automation IC200UEX014 expansion unit is shared among the outputs as well as the common ground. These can drive high inrush currents and receive protection against different voltage pulses that could cause irreversible damage to the whole system. This unit is used with different devices to enhance their operation, providing more opportunities for them to be used with different outputs and inputs without needing a large amount of different equipment.
Common related search terms: Emerson,
