1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.7/5 Based on 8 ratings.

Rate your purchase of the IC200UMM102
IC200UMM102 In Stock VersaMax MicroMotion 2 independent axis 120/240VAC powered.  Micro20/40/64. IC2

SKU 2171018  UPC 0363746303065


PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson



3 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Repair Service


Save $846

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

VersaMax MicroMotion 2 independent axis 120/240VAC powered. Micro20/40/64. IC200U PLC

Technical Information

The GE Fanuc IC200UMM102 VersaMax MicroMotion Module is a 2-axis servo motion module for the VersaMax Micro control system. This module provides independent motion control in a VersaMax Micro PLC or a wide variety of other host controller systems. The VersaMax MicroMotion modules are available in either 24 Volts DC or 110/220 Volts DC modules and both can be DIN Rail-mounted or panel-mounted. The GE VersaMax Micro PLC system can accommodate a maximum of 2 micromotion modules that can act as expansion modules that are directly controlled by the PLC CPU, and the system may also include optional host devices that can also monitor the micromotion modules via the MODBUS RTU protocol. The IC200UMM102 Module features 2 independent motion axes, with built-in I/Os for standard operation, and it comes with built-in memory that can store up to 256 profiles independent of the controller.


The IC200UMM102 MicroMotion Module utilizes an AC power source (110/220 Volts AC) with an 85 to 264 Volts AC operating voltage range and about 1500 Volts AC of dielectric withstand between the module’s terminal and ground. The IC200UMM102 MicroMotion Module features 3 standard operating modes; the “homing mode,” the “automatic mode,” and the “manual mode.” In the automatic mode, the control axis motion is determined via the pre-set motion profile, while in the manual mode, the control axis movement is determined by external signals and commands from the controller. In the “homing mode,” the IC200UMM102 MicroMotion Module automatically establishes a home position for each axis and then writes the home position for that axis on the position data (profile). The IC200UMM102 MicroMotion Module is configured by using the MicroMotion setup tool, which provides an intuitive interface for setting up motion parameters, and it is integrated into the Proficy Machine Edition version 5.7 SIM 3 or later software.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.