GE / IP FANUC Series 90/30 In Stock
1-919-535-3180
1-800-360-6802
Mon-Fri 8AM-5PM EST
IC200ALG262
SKU 2170358 UPC 055774953342
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Other Available Revisions for the IC200ALG262 IC200ALG262A/AIC200ALG262B/BIC200ALG262C/CIC200ALG262D/DIC200ALG262E/EIC200ALG262F/FIC200ALG262G/GIC200ALG262H/HIC200ALG262I/IIC200ALG262J/JIC200ALG262K/KIC200ALG262L/LIC200ALG262LT/LTIC200ALG262M/MIC200ALG262N/NIC200ALG262O/OIC200ALG262P/PIC200ALG262Q/QIC200ALG262R/RIC200ALG262S/SIC200ALG262T/TIC200ALG262U/UIC200ALG262V/VIC200ALG262W/WIC200ALG262X/XIC200ALG262Y/YIC200ALG262Z/Z
Product Description
IC200ALG262 is a 15 Bit Differential Current Module with eight channels from GE Versamax. This analog input module offers an interface to eight analog current inputs that receive power from the backplane power supply. This means no external power source is necessary for module operation. However, power for the user’s transceivers is required from an external source.
The IC200ALG262 has a single group of eight differential input channels with 15-bit converter resolution. The CPU or NIU performs the intelligent processing for this unit as the module provides eight words of analog input data. This unit reports a loss of power fault for field side circuits and open wire faults for every channel but only in 4-20mA mode. A jumper on the carrier terminal can be used to configure this range or the 0-20mA input range as needed, or the lack of a jumper cable will allow the module to use the 4-20mA range. Additionally, LED lights indicate power and proper functioning.
When first installing the IC200ALG262 module, carefully inspect all parts for damage. Do not use damaged parts as this may affect overall functioning. Analog channel connections should be created with shielded twisted pair cable with the cable grounded at the source device. However, if unable to ground at the source, then grounding at the I/O module is appropriate and can be done using the auxiliary I/O terminal. If this option is used, shield connections can be made on an auxiliary I/O terminal connected to the I/O carrier. If additional connections are required, an auxiliary I/O terminal strip can be utilized.
Technical Specifications
| No. of channels: | 8 differential, one group |
| Voltage Range: | -10 to +10 volts DC |
| Current Range: | 4 - 20 mA, 0 - 20 mA |
| Update Rate: | 7.5 ms |
| Input Filter Response: | N/A |
| Power Consumption: | 200 mA from +5V bus |
Troubleshooting
Troubleshooting IC200ALG262
Troubleshooting information is available on IC200ALG262's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC200ALG262
PDF Supply can repair your IC200ALG262 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC200ALG262? Answer: The IC200ALG262 is an 8-Channel, 15-Bit, Current, Differential, Analog Input module from the GE Fanuc Versamax Series.
- Question: What are some characteristics of IC200ALG262's channels? Answer: There are 8 differential channels, all in one group.
- Question: What does the OK LED indicate? Answer: This LED indicates that backplane power is present.
- Question: What is the backplane current consumption? Answer: 5V output; 200 mA maximum
- Question: What are the configuration parameters? Answer: Range select (jumpers on carrier)
- Question: What is the input current? Answer:
- 4 to 20 mA (default: no terminal jumper installed)
- 0 to 20 mA (with terminal jumper installed)
- Question: What is the update rate per module? Answer: 7.5 ms
- Question: What should I do if my IC200ALG262 is not working properly? Answer: Your IC200ALG262 may need repair.
For more information on the IC200ALG262 8-Channel, 15-Bit, Current, Differential, Analog Input Module of the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
Coming Soon...
Common related search terms: Datasheet, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
