GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200ALG263 IC200ALG263AIC200ALG263BIC200ALG263CIC200ALG263DIC200ALG263EIC200ALG263FIC200ALG263GIC200ALG263HIC200ALG263IIC200ALG263JIC200ALG263KIC200ALG263LIC200ALG263-LTIC200ALG263MIC200ALG263NIC200ALG263OIC200ALG263PIC200ALG263QIC200ALG263RIC200ALG263SIC200ALG263TIC200ALG263UIC200ALG263VIC200ALG263WIC200ALG263XIC200ALG263YIC200ALG263Z
The IC200ALG263 is a 15-Channel, 15-Bit, Voltage Analog Input Module manufactured by GE Fanuc for the Versamax Series. This module provides interface to 15 voltage inputs with an input voltage of -10V to +10V, an input impedance of100K Ohms minimum, and an updated rate of 7.5 ms per module. The IC200ALG263 is compatible with the following: VersaPro Software Version 2.0, VersaMax Ethernet NIU Firmware Version 1.10 or higher, and VersaMax PLC CPU Firmware Version 2.10 or higher. Backplane power supply is the main source of power for this module. The IC200ALG263 does not need an external power source to operate; however, power for the user’s transceivers must be supplied from an external source.
The IC200ALG263 is responsible for reporting the loss of internal power fault for field side circuits. The units single handedly report internal hardware error once an A/D conversion malfunction is detected. Errors are detected by applying a known stimulus to the A/D conversion path and authenticating the result. If it produces an unexpected outcome three times in a row, the module stops scanning immediately, turns off the green LED, and reports an internal hardware error. The IC200ALG263 must be power cycled or replaced to clear the error detected. A green LED light provides applicable operation indications to the user.
|No. of channels:||15 single-ended, one group|
|Voltage Range:||-10 to +10 volts DC|
|Update Rate:||7.5 ms|
|Input Filter Response:||N/A|
|Power Consumption:||200mA from +5V bus|
Repair your IC200ALG263
For more information on the IC200ALG263 15-Channel, 15-Bit, Voltage, Analog Input Module of the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.