GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200ALG320 IC200ALG320AIC200ALG320BIC200ALG320CIC200ALG320DIC200ALG320EIC200ALG320FIC200ALG320GIC200ALG320HIC200ALG320IIC200ALG320JIC200ALG320KIC200ALG320LIC200ALG320-LTIC200ALG320MIC200ALG320NIC200ALG320OIC200ALG320PIC200ALG320QIC200ALG320RIC200ALG320SIC200ALG320TIC200ALG320UIC200ALG320VIC200ALG320WIC200ALG320XIC200ALG320YIC200ALG320Z
The IC200ALG320 is a 4-Channel, 12-Bit, Current, Analog Output module from the GE Fanuc VersaMax Series. The IC200ALG320 offers four 4mA to 20mA analog current-sourcing outputs. There is a modest amount of over-range current; roughly 20.38mA of output current per channel is accessible to drive output loads.
The IC200ALG320 is configured easily during setup. A jumper is used for the outputs to retain their last states or default if backplane power or communications is interrupted or if the PLC has stopped. Until the IC200ALG320 receives different output data or the field power is detached, the outputs will remain in their previous or default state.
The IC200ALG320 is equipped with LED indicators. Presence of user-side power pertaining to the analog field-side circuits are indicated by the green FLD power LED. The green OK LED is ON once backplane power is recognized. The IC200ALG320’s lowest load resistance per channel is dependent upon ambient temperature, external voltage, and positioning of the module and DIN rail.
For all connections of the IC200ALG320 analog output module, shielded twisted cable is recommended. If installation of the IC200ALG320 module is on a terminal-style I/O carrier or compact terminal-style I/O carrier, connection of the cable shield can be direct to the carrier if compatible with the field wiring table. The IC200ALG320 module is compatible with the original release of VersaMax CPUs and NIUs.
|No. of channels:||4 single-ended, one group|
|Voltage Range:||18 - 30 VDC|
|Current Range:||4 - 20 mA|
|Update Rate:||0.3 ms|
|LED Indicators:||FLD PWR, OK|
|Power Consumption:||50 mA from +5V bus|
Repair your IC200ALG320
For more information on the IC200ALG320 4-Channel, 12-Bit, Current, Analog Output Module of the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.