GE / IP FANUC Series 90/30 In Stock
SKU 2175019 UPC 072828352463
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Other Available Revisions for the IC200BEM103 IC200BEM103-AA/-AAIC200BEM103-BA/-BAIC200BEM103-CA/-CAIC200BEM103-DA/-DAIC200BEM103-EA/-EAIC200BEM103-GA/-GAIC200BEM103-HA/-HAIC200BEM103-JA/-JAIC200BEM103-KA/-KAIC200BEM103-LA/-LAIC200BEM103A/AIC200BEM103B/BIC200BEM103C/CIC200BEM103D/DIC200BEM103E/EIC200BEM103F/FIC200BEM103G/GIC200BEM103H/HIC200BEM103I/IIC200BEM103J/JIC200BEM103K/KIC200BEM103L/LIC200BEM103LT/LTIC200BEM103M/MIC200BEM103N/NIC200BEM103O/OIC200BEM103P/PIC200BEM103Q/QIC200BEM103R/RIC200BEM103S/SIC200BEM103T/TIC200BEM103U/UIC200BEM103V/VIC200BEM103W/WIC200BEM103X/XIC200BEM103Y/YIC200BEM103Z/Z
IC200BEM103 is a PLC Network Communications DeviceNet Master Module from the GE Fanuc Versamax Series. This particular module can interface with the Versamax PLC CPU to a DeviceNet network with the correct configuration. The IC200BEM103 is easy to install as the communications carrier must be installed first on the DIN Rail. This is accomplished by simply placing the piece and connecting the carriers on the same section of DIN rail. This rail needs to be unpainted to be conductive for proper grounding. Next, making sure the latch is in the unlock position, align the module on the communications connector by aligning the connectors and pressing down until both tabs click into place. Make sure the latch is then moved to the lock position. Finally, connect the communications bus to the connector on the front of the network control module. If needed, remove the connector cover and install additional modules before powering up.
Upon power-up of the IC200BEM103, the system has LEDs that will indicate functionality. If installed in what is considered a hazardous location, be sure to follow all recommended guidelines for safety of the module and self.
When configuring the DeviceNet Network Control module, two steps are necessary. The first requires the configuration software to include the module in PLC configuration, and the second uses programming software to send COMMREQ for network addressing and data lengths.
|Module Type:||Network Communications Module|
|Number of Stations:||N/A|
|I/O Data:||Up to 128 Bytes of inputs and outputs|
|Connector:||5-pin open pluggable|
|Network Data Rate:||125 Kbaud, 250 Kbaud, or 500 Kbaud|
|Power Consumption:||490 mA from 5 V output|
Repair your IC200BEM103
For more information on the IC200BEM103 PLC Network Communications DeviceNet (Master) Module from the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.