GE / IP FANUC Series 90/30 In Stock
IC200CBL001 is a GE Communications Programming Serial Cable. This specific cable offers a 9-pin M to 9-pin F, RS-232 compatible with PacSystem and Versamax. A straight through extension cable works with this cable. This is a CPU programming cable that has been preassembled for ease of use.
When attaching the IC200CBL001 cable, use port 1 as an RS-232 port with a 9-pin female D-sub connector. This is used as the boot loader when upgrading the CPU firmware. The pinout of the port 1 uses a straight through cable to connect with an AT-style, standard port. The cable shielding attaches to the shell for functionality. When using a point to point configuration, the two devices are connected to the same communication line with a maximum of 15 meters length between the two. In this type of connection, the shield must connect to the shell on both connectors on both cable ends to properly function.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.