GE / IP FANUC Series 90/30 In Stock
IC200CH003 is a connector-style carrier I/O manufactured by GE Fanuc automation. The IC200CH003 I/O carrier weighs 0.113 kilograms and comes with a 36-pin connector used for attaching an Input / Output cable. The carrier gives a provision for backplane communications, mounting as well as field wiring for one Input / Output module. You can locate a module latch hole for fastening the module onto the carrier. The carrier also provides fast attachment for wiring up to 32 input / output points and 4 common power connections.
During rail mounting, the IC200CH003 I/O carrier easily snaps onto DIN rail with the following dimensions: 7.5 mm x 35 mm. To provide EMC protection, the DIN must be electrically grounded. They must also have a conductive and corrosion-resistant finish. Field wiring connections are done directly onto the connector style itself with the help of contacts which are crimped to the wire ends. I/O devices can be wired directly to Interposing I/O Terminals. For installation of a pre-wired connecting cable, the cable connector is placed over the connector located on the carrier and later pressed downward until the latch engages with the connector.
To remove the cable, the connector must be held and pressed up on the latch to release the connector. Sometimes, the operating equipment might get hot due to high ambient temperature. When this happens, exercise caution when handling the connector. Be advised not to touch it directly. Also steer clear of exposed connector pins. A connector kit for fabricating custom cables is available and comes with a connector and a cover, 6 large contacts, 2 screws, and 36 small contacts. The IC200CH003 carrier can be used with all VersaMax modules except for the following due to their high isolation requirements:
IC200MDL144 with voltage Input 240 VAC 4 Point Isolated Module
IC200MDD850 Mixed 240 VAC Isolated 4 Point
Output Relay 2.0A Isolated 8 Point Module
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.