GE / IP FANUC Series 90/30 In Stock
|Product Type||Ethernet Network Interface Unit|
|Number of Racks||8 per Station|
|Number of Modules||8 per Rack|
|I/O Data||1024 bytes|
|Ethernet Network Data Rate||10/100 Mbits|
|Ethernet Duplex||Full/Half Auto-Detect|
|Power Consumption||5V at 175 mA, 3.3V at 425 mA|
The IC200EBI001 is an Ethernet Network Interface Unit (ENIU) classified as an Ethernet slave module, which serves as a controller for a set of I/O modules. The IC200EBI001 is designed by GE for the Versamax series. The power supply that is needed for the module’s operation is installed directly on the NIU. There are five LEDs that indicate status of the IC200EBI001 and its components.
Installation of the IC200EBI001 on the DIN rail is easy. The user only needs to click the unit into place. When installing power for the NIU, the latch must be in unlocked position, and all connectors and the latch post must be aligned. Once the power supply module is pressed and the two tabs click into place, the latch must be in locked position for security of the power supply.
The IC200EBI001 ENIU can be autoconfigured, or configurations may be stored via programming software. When power is initiated for the first time, the modules will be autoconfigured by the ENIU in the I/O station. Autoconfiguration will cease at the first empty slot or if the module is faulted. If autoconfiguration fails, it is important to clear existing configuration. This process is done by disconnecting power from the ENIU and disconnecting the ENIU from the first I/O carrier.
The IC200EBI001 Ethernet Network Interface Unit belongs to the GE Fanuc Versamax family of NIUs. It operates as an Ethernet Global Data station that is used for providing I/O and diagnostics data within the Ethernet network. Its memory space supports 256 bytes of discrete input data, discrete output data, analog input data, and analog output data. The total number of NIU modules that can be installed in a station is 64. Its power consumption rating is 5 Volts at 175 milliamps and it is 3.3 Volts at 425 milliamps. The IC200EBI001 Ethernet Network Interface Unit has an Ethernet network data rate of 10/100 Mbits. This module comes with 5 indicator LEDs that are the “PWR” LED, “OK” LED, “FAULTS” LED, “LAN” LED, and the “STAT” LED.
The IC200EBI001 Ethernet Network Interface acts as the connecting point between I/O modules and the Ethernet network. When this module is used with an expansion unit, it can handle up to 64 I/O modules. It has an indicator LED to show the status and the presence of the power of the module. The address of the module can be configured by using 3 rotary switches which are located beneath a transparent protective door. It has an RJ-45 Ethernet port, an expansion connector, a power supply connector, a carrier connector, a DIN-rail latch, and panel mounting holes. The Modbus/TCP protocol is supported by this IC200EBI001 module. It can have up to 10 Modbus TCP connections when it is used in the Modbus mode. It can be installed on a 35 x 7.5 millimeters conductive DIN-rail. It can be connected to the Ethernet network by using an unshielded RJ-45 connector. It supports both the VersaPro 2.0 and Remote I/O manager 2.0 configuration software.
Troubleshooting information is available on IC200EBI001's website page; it also includes a datasheet user-manual and a wiring diagram.
Price and Availability for IC200EBI001
Price for IC200EBI001 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200EBI001 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.
Repair your IC200EBI001
Do you have questions or comments? We would love to hear from you!
1-800-360-6802 or email@example.com
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.