GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200ERM002 IC200ERM002AIC200ERM002BIC200ERM002CIC200ERM002DIC200ERM002EIC200ERM002FIC200ERM002GIC200ERM002HIC200ERM002IIC200ERM002JIC200ERM002KIC200ERM002LIC200ERM002-LTIC200ERM002MIC200ERM002NIC200ERM002OIC200ERM002PIC200ERM002QIC200ERM002RIC200ERM002SIC200ERM002TIC200ERM002UIC200ERM002VIC200ERM002WIC200ERM002XIC200ERM002YIC200ERM002Z
The IC200ERM002 is a non-isolated expansion receiver module made by GE Automation and Controls. As an expansion module, this device is used to extend the functionality of a VersaMax programmable logic controller or an input and output station as well as increase the number of connected modules. This expansion module supports a maximum of seven groups with up to eight modules per group.
This module is 2.63 inches (66.8 millimeters) wide and 5.04 inches (128 millimeters) tall; however, this does not include the dimensions of the power supply. To provide power to any connected modules, a power supply is installed on this product. Note: If a power booster carrier or additional power supply is used, it has to be connected to the main power supply on this expansion module. Three on-board LED lights indicate device status.
The IC200ERM002 can be used in both multi-rack or single-ended VersaMax input and output expansion systems. If this expansion module is used in a multi-rack implementation, the maximum cable length cannot exceed 15 meters or approximately 50 feet. If this product is used in a single-ended implementation with only one expansion rack, the cable length cannot exceed one meter or approximately 3.3 feet. Data transfer rates are either 5 megabits per second or 2.765 megabits per second, depending on implementation.
The IC200ERM002 has two 26-pin female D-shell expansion ports. The top port is used for an inbound expansion cable, and the bottom port is used to either daisy chain the next expansion rack or connect to the terminator plug. This product also has two options for backplane current: 5 volts or 3.3 volts. For 5V backplanes, the current consumption is 70 milliamps. For 3.3V backplanes, the current consumption is 20 milliamps.
Troubleshooting information is available on IC200ERM002's website page; it also includes a datasheet user-manual and a wiring diagram.
Price and Availability for IC200ERM002
Price for IC200ERM002 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200ERM002 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.
Repair your IC200ERM002
Do you have questions or comments? We would love to hear from you!
1-800-360-6802 or email@example.com
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.