GE / IP FANUC Series 90/30 In Stock

Call Now


Mon-Fri 8AM-5PM EST



IC693PWR324 IC200MDL730 Output 24VDC POS LOGIC 2.0 amp per point(1 group o 8) with ESCP 8 points IC200M IC200MD IC200MDL730 Output 24VDC POS LOGIC 2.0 amp per point(1 group o 8) with ESCP 8 points IC200M IC200MD



5 in stock

2 Year warranty

*Need a Specific Revision?

Free Ground Shipping*

US continental orders placed Monday-Friday before 4:30pm EST!

Lowest Price Guarantee

Product Description

Manufactured by GE Automation and Controls, the IC200MDL730 is a VersaMax series discrete output module. This device provides a single group of eight output points, which can be positive logic or sourcing types. The output points on this module are responsible for switching loads to the power supply’s positive side, thereby providing electrical current to all loads.


In addition to the standard backplane power supply, this module will require an external direct current power source to enable output load switching. The backplane power source must be stable for a minimum of one second before this device can accept field power. If field power is applied before the backplane is stable, a false output point fault is likely to occur. The external power source is required to supply a sufficient amount of field power to this product in the event that a short circuit is detected. For further external power supply requirements, see the product documentation.


The IC200MDL730 provides fault detection diagnostics and can determine if an overload or short circuit has occurred. Each output point on this module has the following protection mechanisms: Electronic Short Circuit Protection (ESCP) and overcurrent protection; however, channel to channel isolation is not supported.


Each output point is capable of handling up to 2 amperes of current when operating at 30 volts direct current, and the entire module is capable of driving a maximum of 8 amperes. The amount of current consumed from the 5-volt backplane is 50 milliamps. The output voltage for this module is anywhere from 17.5 to 30 volts of direct current. The nominal output voltage is 24 volts of direct current, and a maximum output voltage drop of 0.5 volts is acceptable.

Output 24VDC POS LOGIC 2.0 amp per point(1 group o 8) with ESCP 8 points IC200M IC200MD IC200MDL
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetManualPDFPLCPriceRepairSpecificationUser-ManualWiring

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.