GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200MDL740 IC200MDL740AIC200MDL740BIC200MDL740CIC200MDL740DIC200MDL740EIC200MDL740FIC200MDL740GIC200MDL740HIC200MDL740IIC200MDL740JIC200MDL740KIC200MDL740LIC200MDL740-LTIC200MDL740MIC200MDL740NIC200MDL740OIC200MDL740PIC200MDL740QIC200MDL740RIC200MDL740SIC200MDL740TIC200MDL740UIC200MDL740VIC200MDL740WIC200MDL740XIC200MDL740YIC200MDL740Z
The IC200MDL740 is an output module from the VersaMax family manufactured by General Electric Intelligent Platforms Control Systems Solutions. In total, this module has one group of 16 output points, each of which supports discrete digital signals. The output points for this device can be either positive logic or sourcing types. Each output point performs load switching and provides power to the loads. This product is compatible with IC200CHS series of interposing relay bases.
This device requires a secondary power source to support output load switching. The amount of current consumed from a five-volt output power supply cannot exceed 45 milliamps. The operating voltage for this module is anywhere from 10.2 to 30 volts of direct current (DC). While this device has a nominal voltage of 24 volts DC, it can also operate at 12 volts DC; however, operating at 12 volts DC will require an upgrade to the IC200MDL740B or later.
The current for each output point is 0.5 amperes, and the response time is 0.2 milliseconds for the “on” state and 1.0 millisecond for the “off” state. Channel to channel isolation is not supported, nor are any protection mechanisms such as internal fuses. Output voltage drop peaks at 0.3 volts, and when operating at 30 volts DC, the output leakage is up to 0.5 milliamps. LED lights indicate device status. These LED lights require field power to operate but are unaffected by output load conditions. The IC200MDL740 also supports thermal derating when operating at 24 or 30 volts DC.
Troubleshooting information is available on IC200MDL740's website page; it also includes a datasheet user-manual and a wiring diagram.
Price and Availability for IC200MDL740
Price for IC200MDL740 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200MDL740 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.
Repair your IC200MDL740
Do you have questions or comments? We would love to hear from you!
1-800-360-6802 or firstname.lastname@example.org
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.