GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC200MDL940 IC200MDL940AIC200MDL940BIC200MDL940CIC200MDL940DIC200MDL940EIC200MDL940FIC200MDL940GIC200MDL940HIC200MDL940IIC200MDL940JIC200MDL940KIC200MDL940LIC200MDL940-LTIC200MDL940MIC200MDL940NIC200MDL940OIC200MDL940PIC200MDL940QIC200MDL940RIC200MDL940SIC200MDL940TIC200MDL940UIC200MDL940VIC200MDL940WIC200MDL940XIC200MDL940YIC200MDL940Z
|Product Type||Output Module|
|Number of Outputs||16 (2 groups of 8 outputs each)|
|Possible Isolation||Channel to Channel, Group to Group|
|AC Output Voltage||0 to 265V AC|
|AC Nominal Voltage||120V, 240V|
|DC Output Voltage||0 to 12V DC|
|DC Nominal Voltage||125V, 24V, 5V|
The IC200MDL940 is a Form A Relay VersaMax Output Module from General Electric with a total of 16 output points. The output points for this device are divided into two groups of eight, and each point is also isolated individually. Group to group and channel to channel isolation are also possible. The IC200MDL940 has fixed coil relay types with moving armatures, and the contact types are silver. This module is compatible with both the IC200CHS101 and IC200CHS102 series of VersaMax interposing disconnect bases.
The IC200MDL940 will consume up to 490 milliamps of current from a five-volt output backplane from which this device receives its primary power. For all load switching, however, another power supply will be needed. The output voltage for the IC200MDL940 has two settings: alternating current and direct current. With alternating current, the output voltage can range from 0 to 265 volts at 47 to 63 hertz, but the nominal voltage is 120 volts and 240 volts. When using direct current, the output voltage is 0 to 125 volts, but the nominal voltage is 5 volts, 24 volts, or 125 volts.
The load current for each point is a minimum of 10 milliamps; however, this will change depending on voltage conditions. With 5 to 265 volts of alternating current, the load per point will be 2 amperes maximum. When using 5 to 30 volts direct current, the load per point will also be at most 2 amperes. With 31 to 125 volts direct current, the load per point will be 0.2 amperes. Note: These load currents are all resistive. Thermal derating, fuses, and snubbers are not applicable to the IC200MDL940.
Troubleshooting information is available on IC200MDL940's website page; it also includes a datasheet user-manual and a wiring diagram.
Price and Availability for IC200MDL940
Price for IC200MDL940 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200MDL940 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.
Repair your IC200MDL940
Do you have questions or comments? We would love to hear from you!
1-800-360-6802 or firstname.lastname@example.org
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.