1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.3/5 Based on 13 ratings.

Rate your purchase of the IC200PNS001

SKU 2171225  UPC 084852153381




7 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

New Surplus


7 In Stock

✓  3 Year PDF Supply Warranty

*What is New Surplus?



1 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Technical Specifications for IC200PNS001

ManufacturerGE Fanuc
Part NumberIC200PNS001
Product TypeNetwork scanner
Ethernet Ports2
Network Speed10/100 Mbps
Power Supplies2
CPURX3i PLC CPU with Firmware version 7.0 or later
Power Requirement3 Watts

Product Description

The IC200PNS001 is a VersaMax PROFINET Scanner by GE that interfaces a remote node of VersaMax modules to a PROFINET I/O network.
Functions of the IC200PNS001 include retrieving input data and delivering output data.

There are two versions of VersaMax PROFINET scanners that allow use of network media to meet user requirements. The IC200PNS001 is equipped with two shielded copper RJ-45 media connectors and can use one or two power supplies. The second power supply is optional, and power supplies can be mounted directly onto the module and latched into place. The IC200PNS001 module’s operating temperature range is 0 to 60°C. The scanner is 5.2mm H x 5.28mm W.

The IC200PNS001 is equipped with LEDs to provide the user with vital status indications. There are two LES for the power supplies, which will emit green when a minimum level of power is being supplied. When ready for normal operations, the OK LED will be solid green and will flash or be off for all other module conditions. If the OK LED blinks amber, there is a failure in powering up or a terminal error in normal operation. The Connect LED will blink amber to indicate the scanner is not ready for use. There is no network when the IC200PNS001 powers up for the first time. Once the network has been named, the corresponding LED will turn off. 

The GE Fanuc IC200PNS001 module is a Versamax Profinet scanner (PNS) module. The PNS network module is available in 2 versions which are the IC200PNS001 version with two 10/100 Mbps Ethernet interfaces and RJ-45 connectors, and the IC200PNS002 version with two 100 Mbps SC-duplex fiber connectors. The Ethernet ports are located on the bottom of the module. Each of the Ethernet ports can automatically sense the network type and adjust the speed and other network parameters. For a connection to be active, a minimum of 1 Ethernet module on the IC200PNS001 module should be operating in the full duplex mode. Either 1 or 2 power supplies can be used with the PNS module. The second power supply is optional. The module power supplies are made to mount on the module. The IC200PNS001 module can be used with RX3i PLC CPUs with Firmware version 7.0 or later and with Proficy Machine Edition software that is version 7.0 or later.

The power requirement of the GE Fanuc IC200PNS001 Versamax PNS module is 3 Watts. The dimensions of the module are 132 millimeters in height and 134 millimeters in width. A carrier is not built into the module. One USB port is integrated into the IC200PNS001 module, however, and it can be used for firmware upgrades. The USB port is USB 2.0 compliant. The module supports one IP address and it also supports CIDR (classless inter domain routing) technology. The maximum number of supported I/O modules per station is 8. The total I/O data that can be handled per station is 2880 bytes with 1440 bytes allocated for input and 1440 bytes allocated for output. The IC200PNS001 PNS module is RoHS compliant.

Technical Information

The IC200PNS001

The IC200PNS001

Troubleshooting IC200PNS001

Troubleshooting information is available on IC200PNS001's website page; it also includes a datasheet user-manual and a wiring diagram.

Price and Availability for IC200PNS001

Price for IC200PNS001 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200PNS001 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.

Repair your IC200PNS001

PDF Supply can repair your IC200PNS001 in 3-5 business days. And PDF Supply stands by all of its repairs with a 2 year customer satisfaction warranty.

Do you have questions or comments? We would love to hear from you!

 1-800-360-6802 or support@pdfsupply.com 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetEmersonManualPDFPLCPriceRepairSpecificationUser-ManualWiring

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.