GE / IP FANUC Series 90/30 In Stock
Call Now
1-800-360-6802
Mon-Fri 8AM-5PM EST
1-919-535-3180
HE693RTD601
SKU 2177355 UPC 0750447140578
MSRP $3995
The HE693RTD601 allows RTD temperature sensors to be connected to the PLC directly without external signal processing such as transducers, transmitters, etc. All analog and digital processing on the module is performed on the HE693RTD601, and temperature values in 0.5°C or 0.5°F increments are written to the 90-30 %AI input table.
Technical Specifications
| Power Consumption (Typical) | 75mA @ 5VDC |
| Number of Channels | 6 |
| I/O Points Required | 6%AI |
| Input Impedance | >1000 Meg Ω |
| Fault Protection | Zener Diode Clamp |
| A/D Conversion Type | 16 bit, Integrating |
| Update Time | 50 Channels per second |
| Average RTD current, PT-100 | 330 microamps |
| Channel to Channel Tracking | 0.1°C |
| Resolution | 0.1°C |
| Accuracy | ± 0.5°C typical, ± 1.0°C for Cu-10 and TD5R |
| Operating Temperature | 0 to 60°C (32° to 140°F) |
| Relative Humidity | 5% to 95% non-condensing |
Technical Information
| Power Consumption (Typical) | 75mA @ 5VDC |
| Number of Channels | 6 |
| I/O Points Required | 6%AI |
| Input Impedance | >1000 Meg Ω |
| Fault Protection | Zener Diode Clamp |
| A/D Conversion Type | 16 bit, Integrating |
| Update Time | 50 Channels per second |
| Average RTD current, PT-100 | 330 microamps |
| Channel to Channel Tracking | 0.1°C |
| Resolution | 0.1°C |
| Accuracy | ± 0.5°C typical, ± 1.0°C for Cu-10 and TD5R |
| Operating Temperature | 0 to 60°C (32° to 140°F) |
| Relative Humidity | 5% to 95% non-condensing |
- Question: What is the HE693RTD601? Answer: The HE693RTD601 allows RTD temperature sensors to be connected to the PLC directly without external signal processing such as transducers, transmitters, etc. All analog and digital processing on the module is performed on the HE693RTD601, and temperature values in 0.5°C or 0.5°F increments are written to the 90-30 %AI input table. All modules feature six channels, and support PT-90 (MIL-7990), PT-100 (alpha=.00385, .003902 and .03906), Ni-120, Cu-10, Cu-50, Cu-53, Cu-100, Pt-1000, TD5R and Linear Resistance.
- Question: What type of power consumption does HE693RTD601 use? Answer: The main power source for the HE693RTD601 uses 75mA @ 5VDC.
- Question: How can I minimize capacitive loading and noise? Answer: Shielded, twisted-pair extension wiring offers the best noise immunity.
- Question: Where should the shields be connected to? Answer: If shielded wiring is used, a good earth ground connection (on one end only) is critical. If shields are connected at the module end, terminals 1 or 20 may be used as the shield ground point.
- Question: Can I change the number of channels or the voltage on this device? Answer: Yes, you can. This is a 6 channel unit.
Common related search terms: Battery, Configuration, Datasheet, Dimension, Firmware, Manual, PDF, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
Adding Items to Cart
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.