1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

Preowned

PDFSupply.com is not an authorized distributor for Mitsubishi | Melservo products. Manufacturer warranties do not apply to purchases from PDFSupply.com. PDFSupply.com offers a complimentary 1-Year PDF Supply warranty on all Mitsubishi | Melservo products and repair services.

Mitsubishi

Melservo

The MELSERVO HC Series is a Mitsubishi product platform for Digital Servo Motors. Its models are designed to be long-lasting, versatile, and fully optimized. It offers low inertia and small capacity models with an absolute position detector. It also has ultra-low inertia servo motors and middle inertia, middle capacity servo motors with absolute position detectors. MELSERVO HC servo motors have rated speeds (p/min) ranging from 1000 to 8192. Each servo motor might have different power requirements such as kW, current consumption, and other power specifications. However, most MELSERVO HC servo motors comply with EN directives, UL/C-UL standards, and others. In addition, MELSERVO HC servo motors are compact and fully optimized, making them an excellent cost practical choice for factory automation. These devices are designed to give users excellent flexibility when it comes to installation. The performance of these motors has improved over previous product lines from the manufacturers. In terms of installation, users should place these devices on noncombustible material. Because installing them directly on or near combustibles will result in a fire. It is also critical to install the equipment in a load-bearing location following the manufacturer's guidelines. Furthermore, environmental conditions should be considered before using and storing the servo motors. For example, the appropriate ambient temperature for the operation is 0 to 40 ℃ (non-freezing). Correspondingly, the MELSERVO-HC servo motors' ambient storage temperature ranges from -15 to 70 ° C. (non-freezing). Aside from that, the non-condensing humidity should be at least 80% RH for servo operation and 90% RH for storing these units.

Collage of images depicting Melservo units

MELSERVO

Mitsubishi Electric has designed and manufactured a wide range of automation products for industrial settings. MELSERVO, which are servo systems of Mitsubishi Electric, are used worldwide in areas spanning from Energy and Electric Systems to Electronic device design, Home Appliances to Information and Communication Systems, and industrial automation to manufacturing semiconductors. MELSERVO solutions have a list of products relating to each component of a drive system. A drive system needs a controller, an amplifier, a motor, programming software, sensors or actuators, and a network. Accordingly, Mitsubishi offers a wide range of products within each component section to fulfill a user’s needs in every aspect. All available products of each category are discussed sequentially.

MELSERVO Product Lines

1. Controllers

Controllers available with MELSERVO solutions are designed to serve a multitude of functions. No need to mention that these controllers are programmable. Functions could be as simple as positioning of the module to as complex as a multi-axis and high-speed system. Controllers in the MELSERVO product line include:

MELSEC iQ-R Series

Controllers from this series feature an advanced and high-speed bus. These controllers have a short cycle time, as well.

  • Simple Motion Modules
    • Sub-Series:
      • RD77GF (Combining the use of Ethernet and accurate synchronous control technology)
        • Product Numbers: RD77GF4 (Up to 4 Control Axes); RD77GF8 (Up to 8 Control Axes); RD77GF16 (Up to 16 Control Axes); RD77GF32 (Up to 32 Control Axes)
        • Operation Cycle: 0.5 milliseconds or more
        • Servo Amplifier: MR-J4-GF (-RJ)
        • Command Interface: IE Field Network with CC-Link
      • RD77MS (Combining versatility for different controls like position control, synchronous control, cam control, and speed-torque control)
        • Product Numbers: RD77MS2 (Up to 2 Control Axes); RD77MS4 (Up to 4 Control Axes); RD77MS8 (Up to 8 Control Axes); RD77MS16 (Up to 16 Control Axes)
        • Operation Cycle: 0.44 milliseconds or more
        • Servo Amplifier: MR-J4-B (-RJ) or MR-J4W- _ B; MR-JE-B
        • Command Interface: SSCNET III/H
  • Motion Controllers
    • Sub-Series:
      • RnMTCPU (Capable of performing control operation using programs. A task is performed independently from a PLC CPU)
        • Product Numbers: R16MTCPU (Up to 16 Control Axes); R32MTCPU (Up to 32 Control Axes); R64MTCPU (Up to 64 Control Axes)
        • Operation Cycle: 0.22 milliseconds or more
        • Servo Amplifier: MR-J4W_-B
        • Command Interface: SSCNET III/H
  • Positioning Modules
    • Sub-Series:
      • RD75P/RD75D (Works using output pulses issued at high speeds)
        • Product Numbers: RD75P2 (Up to 2 Control Axes); RD75P4 (Up to 4 Control Axes); RD75D2 (Up to 2 Control Axes); RD75D4 (Up to 4 Control Axes)
        • Operation Cycle: 0.3 milliseconds or more
        • Servo Amplifier: MR-J4-A (-RJ) and MR-JE-A or MR-JE-C
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC-Q Series

These controllers are designed to be highly versatile, and they meet the needs of any field and/or industry.

  • Simple Motion Modules
    • Sub-Series:
      • QD77GF (Combining use of Ethernet and accurate synchronous control technology like RD77GF)
        • Product Numbers: QD77GF4 (Up to 4 Control Axes); QD77GF8 (Up to 8 Control Axes); QD77GF16 (Up to 16 Control Axes)
        • Command Interface: IE Field Network with CC-Link
      • QD77MS (Simple to use controller)
        • Product Numbers: QD77MS2 (Up to 2 Control Axes); QD77MS4 (Up to 4 Control Axes); QD77MS16 (Up to 16 Control Axes)
        • Command Interface: SSCNET III/H
  • Motion Controllers
    • Sub-Series:
      • Q17nDSCPU (Module consists of a CPU that works with a PLC CPU to control motion)
        • Product Numbers: Q172DSCPU (16 Control Axes); Q173DSCPU (32 Control Axes)
        • Command Interface: SSCNET III/H
  • Standalone Motion Controller
    • Sub-Series:
      • Q10MSCPU (Consists of a power supply, PLC, and a motion controller, combining it all into one controller)
        • Product Numbers: Q170MSCPU equivalent to Q03UDCPU (16 Control Axes); Q170MSCPU-S1 Equivalent to Q06UDHCPU (16 Control Axes)
        • Command Interface: SSCNET III/H
  • Positioning Modules
    • Sub-Series:
      • QD75PN (For transistor output) or QD75DN (For differential driver output)
        • Product Numbers: QD75P1N or QD75D1N (1 Control Axis); QD75P2N or QD75D2N (2 Control Axes); QD75P4N or QD75D4N (4 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.
      • QD70P or QD70D
        • Product Numbers: QD70P4 or QD70D4 (4 Control Axes); QD70P8 or QD70D8 (8 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC iQ-F Series

These controllers are capable of working well in applications relating to network systems, as well as stand-alone uses. These controllers bring their users to the advanced level of the industry.

  • Simple Motion Modules
    • Sub-Series:
      • FX5-40SSC-S or FX5-80SSC-S (Advanced and compact controllers. Use sequence programs only to control speed and torque, perform synchronous and cam control)
        • Product Numbers: FX5-40SSC-S (Up to 4 Control Axes); FX5-80SSC-S (Up to 8 Control Axes)
        • Servo Amplifier: MR-J4-B (-RJ) or MR-J4W_-B, and MR-JE-B
        • Command Interface: SSCNET III/H
  • A PLC CPU module with a built-in positioning function
    • Sub-Series:
      • FX5U or FX5UC series (Perform positioning tasks via the use of table operation and positioning instructions)
        • Product Numbers: FX5U or FX5UC (Up to 4 Control Axes) - Used with I/O pulse modules performing at high speeds, up to 12 axes can be controlled
          • Servo Amplifier:
            • MR-J4-A(-RJ); MR-JE-C MR-JE-A
              • Command Interface: Train through transistor output
            • MR-J4-GF(-RJ) MR-JE-C
              • Field Basic CC-Link IE Network

MELSEC-L Series

L series controllers are ideal for applications where space is limited because they lack base. Moreover, these controllers are highly scalable.

  • Simple Motion Modules
    • Sub-Series:
      • LD77MS (Performs various tasks like cam control, synchronous control, and speed-torque control for press fit or tightening.
        • Product Numbers: LD77MS2 (2 Control Axes); LD77MS4 (4 Control Axes); LD77MS16 (16 Control Axes)
        • Command Interface: SSCNET III/H
  • SSCNET III/H Head Module
    • Sub-Series:
      • LJ72MS15 (Used to establish a connection between the I/O modules of the L series. Intelligent function module to network SSCNET III/H)
        • Product Numbers: LJ72MS15
        • Command Interface: SSCNET III/H
  • PLC CPU module with built-in function for positioning
    • Sub-Series:
      • LCPU
        • Product Numbers: LCPU (2 Control Axes)
        • Command Interface: Entails built-in I/O to output commanding pulses a to servo amplifier
  • Positioning Modules
    • Sub-Series:
      • LD75P (Pulse train output of transistor) or LD75D (For differential driver output)
        • Product Numbers: LD75P1 or LD75D1 (1 Control Axis); LD75P2 or LD75D2 (2 Control Axes); LD75P4 or LD75D4 (4 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC-F Series

  • Main Unit with function for positioning built-in
    • Sub-Series:
      • FX3u/FX3uc (g=Gives pulse outputs, uses the main unit to perform position control)
        • Product Numbers: FX3u/FX3uc (3 Control Axes)
        • Command Interface: Pulse trains for position control
  • Positioning Module
    • Sub-Series:
      • FX3u - 1PG (Programmable controller of FX series, uses output block for pulse trains)
        • Product Numbers: FX3u - 1PG (1 Control Axis)
        • Command Interface: Pulse Train Output

C Controller or Personal Computer (PC) Embedded-type Servo System Controllers

Using a PC with a board controller or a C controller with an interfacing module allows the user to efficiently control a servo system.

  • Simple Motion Board

    • Sub-Series:
      • MR-EM340GF (Embed in a Personal computer. Uses user programs to control MR-J4-GF. Also supports PCI express)
        • Product Numbers: MR-EM340GF (120 Control Axes)
        • Command Interface: CC-Link IE Field
  • C Controller Interface Module

    • Sub-Series:
    • Q173SCCF (PCI express is used to connect it to a C Controller. User program is used to control the MR-J4-B)
      • Product Numbers: Q173SCCF (20 Control Axes)
      • Command Interface: SSCNET III/H
  • Position Board

    • Sub-Series:
      • MR - MC (Embedded in a PC. Uses a user program for controlling the MR-J4-B. Supports Peripheral Component Interconnect Express (PCI Express), Compact PCI, and PCI Bus)
        • Product Numbers: MR-MC2_0 (20 Control Axes); MR-MC2_1 (32 Control Axes); MR-MC341 (64 Control Axes)
        • Command Interface: SSCNET III/H

2. Servo Amplifiers

Servo solutions by Mitsubishi Electric serve applications demanding high speeds with good accuracy. These servos could be one-touch or multi-axis. Amplifiers in the MELSERVO system work well with motors that have linear or rotary motion.

MELSERVO-J4 Series

MELSERVO-J4 encompasses all-digital technology, is safe for the operating staff and the environment, and features a novel design to make it an energy-efficient product. Different products in this series support various interfaces for issuing commands.

Catalog number MR-J4-GF(-RJ) is compatible with the CC-Link IE Field Network and supports SSCNET III/H communications, depending upon the model. It works in a complete closed loop, and it is capable of performing interpolation control, as well as advanced synchronous control. It may be powered via a power supply rated at 100V, 300V, or 400V AC. Servos from the MELSERVO-J4 series mainly support DD motors, as well as rotary and linear servo motors.

MELSERVO-JE Series

Servo modules in the MELSERVO-JE series bring together features of easy use and basic performance with reliability. It provides its users with the option to adjust controller gains with just one touch. Some modules of this series feature an absolute position detection system, while others have a built-in function to know the position. The MELSERVO-JE series ensures high performance, and it is compatible with various global standards.

In this series...

  • MR-JE-C is compatible with Ethernet supporting CC-Link IE Field Basic
  • MR-JE-B is compatible with SSCNET III/H
  • MR-JE-A is a servo amplifier compatible with a general-purpose interface

3. Servo Motors

In the MELSERVO servo line, there are linear, rotary, and direct drive (DD) motors.

HG Series of Motors for MELSERVO-J4

  1. The HG-KR and HG-MR sub-series of motors have a small capacity and low inertia. Their capacity lies between 50W and 750W. The HG-KR sub-series has general-purpose machinery for an industrial setting, while the motors within the HG-MR sub-series are suitable for operations demanding a high throughput.
  2. HG-SR motors have a medium capacity in the range of 0.5kW to 220kW. Its inertia is also medium. It is suitable for use in material handling applications, robots, loaders, unloaders, and much more.
  3. The HG-JR sub-series has medium to large capacity (ranges between 0.5 and 220kW) servo motors. These motors go well in the food packaging industry, as well as printing machines, the press industry, and so on.
  4. The HG-AK sub-series has compact machinery with a small capacity in the range of 10W to 30W. it is suitable for systems needing small capacity motors like semi-conductor manufacturing systems, electronic component manufacturing, etc.
  5. The HG-RR sub-series has a medium capacity and very low inertia servo motors. These motors are good for applications requiring a high throughput, such as material handling, roll feeders, etc.
  6. The HG-UR sub-series motors have a flat structure and medium capacity. These motors are suitable for applications that have limited mounting space, like robots and conveyors.

HG Series of Motors for MELSERVO-JE

  1. The HG-KN sub-series has low inertia and small capacity servo motors. These are suitable for applications such as PCB drilling and embroidery or knitting machines.
  2. The HG-SN sub-series include medium capacity motors with medium inertia. These motors go well with applications in which the required load inertia is large.

LM Series of Motors for MELSERVO-J4

The LM series belong to linear servo motors which are used generally used for linear motion systems needing accuracy with high speed.

  1. The LM-H3 has a 3 m/s maximum speed. Its core is wound to save space. It is a highly rigid motor.
  2. The LM-F has a 2 m/s maximum speed. Its core is also compact. It has an in-built liquid cooling system.
  3. The LM-K2 has a maximum speed of 2 m/s. its core is designed to have counter force in magnetic attraction, which makes this machine less noisy, thus, extending the life of linear guides.
  4. The LM-U2 has a maximum speed of 2 m/s. it is a cordless machine. It might experience slight speed fluctuations when there is no cogging.

TM Series of Motors for MELSERVO-J4

Direct Drive motors are quite compact yet provide control with high accuracy.

  1. TM-RG2M and TM-RU2M are low-profile motors. They could be flange type or table type.
  2. The TM-RFM has high torque and high rigidity.

4. Networks

CC-Link Field Network

This is an open network with an Ethernet basis. This network works well for distributed control, safety control, I/O control, and motion control simultaneously. Its operation cycle is two (2) times faster than that of previous models. It can be set up easily.

SSCNET III/H

This network comes with amazing fast speed to the tune of 150Mbps full duplex. This network uses optical fiber technology, which makes it suitable for synchronization at high speeds. This communication system allows for a reduction in the cycle time of the machine. It also makes wiring easy and safe leading to a simple and quick start-up.

Selecting Models for Controllers and PLC CPUs

Based on the system size:

  • The MELSEC iQ-R series is for medium to large-scale control.
  • The MELSEC Q series is also for medium to large-scale control. This series introduced the idea of incorporating more than one CPU architecture.
  • The MELSEC L series is for medium to large-scale control. It is baseless and, therefore, suitable for applications with limited space.
  • The MELSEC iQ-F series is suitable for small-scale and stand-alone applications. This controller has amazingly high performance.
  • The MELSEC iQ-R series is also for stand-alone and small-scale applications.

Models can also be selected while considering the control method as a decisive factor.

Browse our selection of Melservo units

PDFSupply.com's online catalog offers one of the largest selections of preowned Melservo units in the world.

HC-KFS23

Catalog number HC-KFS23 is an AC servo motor from Mitsubishi Electric. This product belongs within the Melservo series of products. This motor has a voltage rating of 118 volts, as well as a current rating of 1.1 amperes. The output power rating of the HC-KFS23 is 200 watts. The speed rating of this servo motor is 3000 revolutions per minute. The approximate weight of the HC-KFS23 is 1 kilogram.

We have 2 units available to ship today with prices as low as $1051.

HC-KFS43

Part number HC-KFS43 is a low-inertia, small-capacity servo motor. The power output of this device is rated at 0.4 kilowatts. This motor's rated torque is 1.3 Nm. Additionally, the HC-KFS43 produced a speed rated at 3000 rpm, with a maximum speed rated at 4500 rpm. The current rating of this device is 2.3 amperes. The mass of this servo motor is 1.45 kilograms (3.20 pounds).

We have 1 unit available to ship today with prices as low as $1158.

HC-KFS43K

Catalog number HC-KFS43K is a low-inertia servo motor with a small capacity. This motor has a 0.4-kilowatt rated power output. Additionally, its torque is rated at 1.3 Nm. The HC-KFS43K delivers a 3000 r/min rated speed, along with delivering a 4500 r/min maximum rated speed. The current of this servo motor is rated at 2.3 amperes. The weight of the HC-KFS43K is approximately 1.45 kilograms.

We have 3 units available to ship today with prices as low as $1164.

HC-KFS73

Product number HC-KFS73 is a servo motor from Mitsubishi Electric. This motor has a small capacity and low inertia. The speed rating of the HC-KFS73 is 3000 rev/min, while the maximum speed rating is 4500 rev/min. This servo motor is completely enclosed in an IP55-rated enclosure. This enclosure is also self-cooled. The mass of the HC-KFS73 is approximately 3.0 kilograms (6.61 pounds).

We have 3 units available to ship today with prices as low as $1583.

HC-KFS73K

The HC-KFS73K servo motor from Mitsubishi Electric has low inertia and a small capacity. This motor runs at speeds rated at 3000 revolutions per minute, with the maximum speed of this motor reaching 4500 revolutions per minute. The HC-KFS73K has a rated output of 0.75 kilowatts, in addition to a rated current of 5.8 amperes. This servo motor has an IP55-rated enclosure with self-cooling capabilities.

We have 2 units available to ship today with prices as low as $1583.

HC-MFS73K

Part number HC-MFS73K is a Mitsubishi Electric servo motor. This motor has ultra-low inertia, as well as a small capacity. The output rating of this servo motor is 750 watts. Additionally, the torque rating is 2.4 Nm (340 oz-in). This servo motor produces speeds rated at 3000 rpm, while also being able to produce maximum speeds rated at 4500 rpm. The HC-MFS73K servo motor has an approximate mass of 3.0 kilograms or 6.61 pounds.

We have 2 units available to ship today with prices as low as $1596.

HC-SFS102K

Catalog number HC-SFS102K is a 200-volt servo motor. This motor has medium inertia and a medium capacity. The HC-SFS102K has a 1.0-kilowatt output rating, in addition to a torque rating of 4.78 Nm (677 oz-in). Furthermore, this servo motor's current is rated at 6 amperes, along with a max current rated at 18 amperes. The HC-SFS102K servo motor delivers speeds rated at 2000 r/min with maximum speeds rated at 3000 r/min. This servo motor approximately weighs 7.0 kilograms (15.4 pounds).

We have 2 units available to ship today with prices as low as $1716.

HC-SFS52K

Product number HC-SFS52K is a medium-inertia servo motor with a medium capacity and a voltage rating of 200 volts. The rated output of this motor is 0.5 kilowatts. Additionally, this servo motor can operate at speeds rated at 2000 rpm, with maximum speeds rated at 3000 rpm. The HC-SFS52K has a recommended load inertia moment-to-servo motor shaft inertia moment ratio of 15 times or less. This servo motor has an enclosure that is self-cooled, has an IP65 protection rating, and completely encloses the HC-SFS52K.

We have 1 unit available to ship today with prices as low as $1663.

HF-KP43

Catalog number HF-KP43 is a small capacity servo motor with low inertia. This device's output is rated at 0.4 kilowatts. In addition, its torque is rated at 1.3 Nm. This Mitsubishi Electric servo motor can perform at speeds rated at 3000 rev/min. It can also perform at maximum speeds rated at 6000 rev/min. The current rating of the HF-KP43 servo motor is 2.7 amperes. Additionally, the radial load of this device is 245 Newtons, while the thrust load is 98 Newtons. The HF-KP43 has an approximate weight of 1.5 kilograms.

We have 1 unit available to ship today with prices as low as $1184.

HF-KP43B

The HF-KP43B servo motor from Mitsubishi Electric is classified as a spring-loaded safety brake. This device has a voltage rating of 24 volts DC with a capacity of7.9 watts at 20 degrees Celsius. The coil resistance rating of the HF-KP43B is 73.0 ohms. It also has an inductance rating of 0.18 Henry. The brakes of this servo motor are estimated to work for 20,000 cycles.

We have 3 units available to ship today with prices as low as $1397.

HF-KP43BK

Product number HF-KP43BK is a 200V servo motor. This device was produced by Mitsubishi Electric, and it belongs to the Melservo series of products. It has an electromagnetic brake and a keyway. This servo motor's output is rated at 400 watts. The HF-KP43BK runs at speeds rated at 3000 revolutions per minute, and the maximum speed it can run at is rated at 6000 revolutions per minute. Additionally, this servo motor's current is rated at 2.7 amperes, with a maximum current rated at 8.1 amperes. The standard weight of the HF-KP43BK is 1.5 kilograms.

We have 2 units available to ship today with prices as low as $1397.

HF-KP43K

Catalog number HF-KP43K is a Mitsubishi Electric servo motor with a keyway. The HF-KP43K belongs to the 200-volt class of servo motors. It has an output rated at 400 watts, as well as torque rated at 1.3 Nm. This servo motor operates at speeds rated at 3000 rev/min. The HF-KP43K has an enclosure with a protection rating of IP65. This servo motor should only be used in an indoor setting.

We have 2 units available to ship today with prices as low as $1131.

HF-KP73

Part number HF-KP73 is a servo motor. Produced by Mitsubishi Electric, this unit belongs to the Melservo line of products. The rated power output of this product is 750 watts. Additionally, the torque rating of this unit is 2.4 Nm (340 oz-in). The speed of this product is rated at 3000 r/min, with the maximum speed rated at 6000 r/min. It has a rated current of 5.2 amperes, along with a maximum current of 15.6 amperes.

We have 2 units available to ship today with prices as low as $1583.

HF-KP73B

Catalog number HF-KP73B is a Melservo-series servo motor from Mitsubishi Electric. This servo motor has an electromagnetic brake included in its design. This motor has a rated speed of 3000 revolutions per minute. It also has an output rated at 750 watts. The enclosure of this motor completely encloses the motor and is non-ventilated. The enclosure has a protection rating o IP65. This servo motor has a standard weight of 2.9 kilograms.

We have 2 units available to ship today with prices as low as $1716.

HF-KP73BK

The Mitsubishi Electric HF-KP73BK 200V servo motor has an electromagnetic brake, as well as a keyway. This device performs at speeds rated at 3000 revolutions per minute. The current of this product is rated as 5.2 amperes. Additionally, its torque is rated at 2.4 Nm. This servo motor has an enclosure with a protection rating of IP65. It is extremely recommended that this device only be used indoors and away from direct sunlight.

HF-KP73K

Catalog number HF-KP73K is a 200-volt servo motor from Mitsubishi Electric. This device belongs to the Melservo series of products, and it has a keyway. The HF-KP73K has a rated output of 750 watts. The torque of this unit is rated as 2.4 Nm, with the maximum torque rated as 7.2 Nm. The HF-KP73K's speed has a rating of 3000 rpm, with its max speed has a rating of 6000 rpm.

We have 2 units available to ship today with prices as low as $1583.

HG-KR23

Part number HG-KR23 is a standard servo motor that was produced by Mitsubishi Electric. This product has an output rated at 0.2 kilowatts, as well as a rated torque of 0.64 Nm. Additionally, the rated current of the HG-KR23 is 1.3 amperes. The HG-KR23 servo motor's speed is rated at 3000 revolutions per minute. This product has an IP65-rated enclosure that cools the device naturally. The standard mass of this servo motor is 0.91 kilograms.

We have 1 unit available to ship today with prices as low as $865.

HG-KR23B

Catalog number HG-KR23B is a standard servo motor with a small capacity and low inertia. This unit has a rated speed of 3000 rev/min. It also has an output rated at 0.2 kilowatts and a current rated at 1.3 amperes. The HG-KR23B includes an electromagnetic brake in its design. This device has a 16.7 kW/s power rating at the continuous rated torque. The weight of the HG-KR23B is 1.3 kilograms.

We have 1 unit available to ship today with prices as low as $1264.

HG-KR23BK

The HG-KR23BK servo motor from Mitsubishi Electric has an integrated electromagnetic brake, as well as a keyway, in its architecture. This product works at speeds rated at 3000 revolutions per minute. The HG-KR23BK has a current that is rated at 1.3 amperes. Additionally, the torque of this motor is rated at 0.64 Newton meters. The thrust load of the HG-KR23BK is 98 N, while the radial load is 245 N.

We have 2 units available to ship today with prices as low as $785.

HG-KR23K

Part number HG-KR23K from Mitsubishi Electric is a standard servo motor. The HG-KR23K includes a keyway in its design architecture. This servo motor is capable of running at a maximum speed of 6000 rev/min. The torque of the HG-KR23K is 0.64 Nm, while the maximum torque is 2.2 Nm. It has a power output of 0.2 kW, as well as a current of 1.3 amperes. The HG-KR23K has a natural-cooling enclosure with an IP rating of IP65.

We have 1 unit available to ship today with prices as low as $865.

HG-KR43

Catalog number HG-KR43 is a standard servo motor. This servo motor, which was manufactured by Mitsubishi Electric, belongs to the Melservo product series. This device has an output rated at 0.4 kilowatts, as well as a current rated at 2.6 amperes. The torque of this unit is 1.3 Newton meters. This servo motor can operate at a maximum rated speed of 6000 rpm, though the rated speed of the HG-KR43 is 3000 rpm. This servo motor's weight is 1.4 kilograms.

We have 5 units available to ship today with prices as low as $552.

HG-KR43B

The HG-KR43B servo motor from Mitsubishi Electric has an electromagnetic brake as a part of its design. This unit belongs to the Melservo product line. Its torque is rated as 1.3 Nm, while the maximum torque is rated as 4.5 Nm. The HG-KR43B has an output rated as 0.4 kW and a current rated as 2.6 amperes. The speed of this motor is rated as 3000 rev/min. It has an enclosure with natural-cooling capabilities and an IP65 protection rating. The mass of this product with the electromagnetic brake is 1.8 kilograms.

We have 4 units available to ship today with prices as low as $1450.

HG-KR43BK

Product number HG-KR43BK is a low inertia servo motor produced by Mitsubishi Electric. This motor has a small capacity, and it belongs to the Melservo product series. The output of this device is rated at 0.4 kilowatts, and the torque is rated at 1.3 Newton meters. The HG-KR43BK operates at a rated speed of 3000 revolutions per minute. This servo motor features an electromagnetic brake, as well as a keyway, in its design.

We have 1 unit available to ship today with prices as low as $1450.

HG-KR43K

Catalog number HG-KR43K is a servo motor that was produced by Mitsubishi Electric. It features a keyway. This servo motor has low inertia, as well as a small capacity. This servo motor's speed is rated at 3000 rev/min, with its max speed rated at 6000 rev/min. The structure of the HG-KR43K features a natural-cooling, IP65-rated enclosure. This product weighs about 1.4 kilograms.

We have 3 units available to ship today with prices as low as $985.

HG-KR73

Part number HG-KR73 is a low-inertia, small-capacity servo motor from Mitsubishi Electric. The output of this product is rated at 0.75 kilowatts, and the torque is rated at 2.4 Nm. Additionally, the current of the HG-KR73 is rated at 4.8 amperes. This servo motor typically operates at a rated speed of 3000 r/min, though it can operate at a maximum rated speed of 6000 r/min. The HG-KR73 has an approximate weight of 2.8 kilograms.

We have 5 units available to ship today with prices as low as $785.

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.