1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST



Rated 3.8/5 Based on 7 ratings.

Rate your purchase of the HG-SR102B
Image of HG-SR102B

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Original Packaging


1 In Stock


The HG-SR102B servo motor was produced by Mitsubishi Electric as part of the Melservo product series. The shaft of this motor is straight. It has a power rating of 1000 watts, a current rating of 5.6 amperes, and a supply voltage rating of 200 volts AC. The HG-SR102B has an electromagnetic brake, in addition to an absolute feedback encoder with a resolution of 4,194,304 pulses per revolution (22-bits). This motor includes two (2) MS-type connections. The permissible load for the motor's shaft includes a radial load of 980 Newtons and a thrust load of 490 Newtons. The length of the shaft measures 55 millimeters. The torque rating of the HG-SR102B servo motor is 4.8 Newton meters, while the maximum torque rating is 14.3 Newton meters. The rotational speed rating of this motor is 2,000 revolutions per minute, and the maximum rotational speed rating is 3,000 revolutions per minute. Additionally, the instantaneous permissible speed rating is 3,450 revolutions per minute. The HG-SR102B servo motor's recommended load to motor inertia ratio is 17 times or less. The power rate at the continuous rated torque is 16.5 kW/s. There is a 130 mm x 130 mm flange mounting option with this motor. The HG-SR102B's enclosure, which completely encloses the device, has an Ingress Protection rating of IP67. The enclosure protects the motor against a slew of environmental hazards, such as water jets, dust, dirt, and so on. The HG-SR102B servo motor should be installed within an indoor setting and away from direct sunlight.

Technical Specifications for HG-SR102B

ManufacturerMitsubishi Electric
Product series Melservo
Voltage class200 volts AC
Power supply capacity 2.5 kVA
Rated output 1 kilowatt
Rated current 5.6 amperes
Maximum current 17 amperes
Rated Speed2000 rev/min
Nominal Torque4.8 Nm
Ambient Operating Temperature0 to 40 °C
Radial Load Rating980 N
Thrust Load Rating490 N
Weight6.2 kilograms


PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.